Ram Chassis Cab 2020 Owner's Manual
![Ram Chassis Cab 2020 Truck manual cover](/images/SCVUtKFoUzPggzRVguSBnIhz/thumbs/thumb175x175.webp)
The recommended oil type for the Ram Chassis Cab 2020 is SAE 5W-40 synthetic engine oil for optimal performance.
It is recommended to inspect the air filter every 12,000 miles and replace it if it appears dirty or damaged to ensure proper engine performance.
The towing capacity of the Ram Chassis Cab 2020 can vary depending on the configuration, but it can tow up to 35,220 pounds when properly equipped.
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine, press the accelerator pedal three times within 10 seconds, then turn the ignition off.
The Ram Chassis Cab 2020 requires Mopar ATF+4 automatic transmission fluid for optimal transmission performance.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, reduce excess weight, and drive at steady speeds.
Check for any electrical components left on, ensure the battery terminals are clean, and consider testing the battery to see if it needs replacement.
To change the windshield wipers, lift the wiper arm away from the windshield, press the tab on the wiper blade, and slide the old blade off. Attach the new blade by reversing the process.
The recommended tire pressure for the Ram Chassis Cab 2020 can typically be found on the driver's side door jamb and is usually around 65 psi for the front and 80 psi for the rear tires, depending on load.
If the truck won't start, check the battery for charge, ensure the starter and alternator are functioning, and verify that there is fuel in the tank. If problems persist, consult a professional mechanic.