Radica Password Door Pass I9924 Instruction Manual

To reset the password, press and hold the reset button located at the back of the toy. While holding it, enter the default code '0000' and then set your new password.
Ensure that you are entering the password correctly. If the problem persists, try resetting the password using the reset procedure in the manual. Make sure the batteries are not depleted.
To change the batteries, open the battery compartment located on the back of the device with a screwdriver. Replace the old batteries with new ones, ensuring the correct polarity.
Check if the volume is turned up. If it is and there's still no sound, replace the batteries and check for any loose connections or damage to the speaker.
Yes, the Password Door Pass can be mounted on most doors. Ensure the surface is clean and dry before attaching the unit using the provided adhesive strips or screws.
First, check if the batteries are functioning. If they are, try cleaning the buttons gently with a soft cloth. If the issue persists, it might be a hardware problem requiring professional repair.
To activate the alarm, enter your password, press the 'alarm' button, and then confirm by pressing OK. The alarm will sound if an incorrect password is entered multiple times.
To disable sound effects, use the 'mute' button on the device. Note that this will only mute the sound until the device is powered off and back on again.
Frequent resets could be due to loose battery connections or depleted batteries. Check the battery compartment for any loose connections and replace the batteries if necessary.
Use a soft, damp cloth to gently clean the surface of the Password Door Pass. Avoid using any harsh chemicals or water on the electronic components.