Polaris Sportsman Touring 570, X2 570 Owner's Manual
![Polaris Sportsman Touring 570, X2 570 manual cover](/images/35cdbaf762a332b93a1e17d9/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, turn it off, and place a drain pan under the oil drain plug. Remove the plug and allow the oil to fully drain. Replace the drain plug and remove the oil filter. Install a new filter and refill with the recommended oil type and amount.
Check the battery connections for corrosion and ensure they're tight. Verify that the battery is charged. Inspect the fuses and replace any that are blown. Examine the ignition switch and starter relay. If the issue persists, consult a professional technician.
Regular maintenance should be performed every 50 hours or 6 months, whichever comes first. This includes checking and changing fluids, inspecting brakes, and checking tire pressure. Refer to the owner’s manual for detailed service intervals.
Use a high-quality 50/50 pre-mixed antifreeze and distilled water solution, specifically designed for aluminum engines, to ensure optimal cooling system performance.
Maintain proper tire pressure, keep up with regular maintenance, and avoid carrying unnecessary weight. Driving at consistent speeds and avoiding rapid acceleration can also help improve fuel efficiency.
Ensure the radiator is clean and free from debris. Check the coolant level and top up if necessary. Verify that the cooling fan is functioning correctly. If overheating continues, have the thermostat and water pump inspected.
Adjust the preload on the shock absorbers by turning the adjustment ring clockwise to increase preload or counterclockwise to decrease it. Make sure adjustments are even on both sides for balanced handling.
Clean the vehicle thoroughly and apply a protective wax. Add fuel stabilizer and fill the tank. Change the oil and filter, and disconnect the battery. Store in a dry place with a cover to protect against dust and moisture.
Start by checking all fuses and replace any that are faulty. Inspect the wiring for any visible damage or loose connections. Test the battery for charge and performance. Use a multimeter to diagnose electrical components if necessary.
Common signs include slipping during acceleration, unusual noises such as squeaking or squealing, and visible wear or damage to the belt. Regularly inspect the belt for cracks or fraying.