Polaris 120 v3 Owner's Manual
![Polaris 120 2008 manual cover](/images/a8c2e32bca30c2053d1376b9/thumbs/thumb175x175.webp)
The Polaris 120 2008 requires unleaded gasoline with a minimum octane rating of 87.
It is recommended to change the oil every 20 hours of operation or at least once per season.
The correct tire pressure for the Polaris 120 2008 is 4 PSI for both front and rear tires.
Check the fuel level, ensure the choke is set properly, inspect the spark plug for wear, and verify that the kill switch is in the 'run' position.
Use SAE 10W-30 oil for the Polaris 120 2008. Ensure it is suitable for 4-stroke engines.
Regularly check the chain tension and lubricate it with a suitable chain lubricant to prevent wear and rust.
Loosen the locknut on the throttle cable adjuster, turn the adjuster until the desired tension is achieved, and then retighten the locknut.
Ensure the cooling fins are clean and unobstructed, check the oil level, and ensure the air intake is not blocked.
Drain the fuel tank, change the oil, remove the battery and store it in a cool, dry place, and cover the vehicle to protect it from dust and moisture.
Use NGK BPMR6A spark plug, gapped to 0.028 inches (0.7 mm).