Polaris Sportsman 700 Owner's Manual
![Polaris Sportsman 700 manual cover](/images/8caafc72e20439077ecce812/thumbs/thumb175x175.webp)
To perform an oil change, first warm up the engine, then turn it off. Remove the drain plug and let the oil drain completely. Replace the drain plug and remove the oil filter, replacing it with a new one. Finally, refill the engine with the recommended oil type and quantity.
Overheating can be caused by low coolant levels, a clogged radiator, a faulty thermostat, or a failing water pump. Check each component and ensure proper maintenance to prevent overheating issues.
Start by checking the battery connections and voltage. Inspect fuses and replace any blown ones. Look for any damaged wiring or loose connectors. If issues persist, consult a professional technician.
It's recommended to change the oil and filter every 50 hours, inspect and clean the air filter every 25 hours, and check the coolant and brake fluids regularly. Refer to the owner's manual for a full maintenance schedule.
For winter storage, clean the ATV thoroughly, change the oil, and fill the fuel tank. Add a fuel stabilizer and run the engine for a few minutes. Disconnect the battery and store it in a cool, dry place. Cover the ATV to protect it from dust and moisture.
Common reasons include a dead battery, faulty starter, or fuel delivery issues. Check the battery charge, inspect the starter motor, and ensure the fuel lines and filter are not clogged.
To adjust the suspension, locate the preload adjuster on the shock absorbers. Turn the adjuster clockwise to stiffen the suspension or counterclockwise to soften it, according to your riding preference.
Spongy brakes may be due to air in the brake lines or worn brake pads. Bleed the brake lines to remove air and inspect the brake pads for wear. Replace pads if necessary.
Use a tire pressure gauge to check the pressure of each tire. Adjust the pressure to the manufacturer's recommended level found in the owner's manual. Regularly inspect tires for damage or excessive wear.
Signs of a failing clutch include difficulty in shifting gears, unusual noises while the clutch is engaged, and a noticeable decrease in performance. If you experience these issues, inspect the clutch system and consider professional repair if needed.