Polaris Indy 120 Owner's Manual

Pages 101

Year 2022

Language(s)

of 101

Polaris Indy 120 Specification

The Polaris Indy 120 is a youth snowmobile designed for introductory riding experiences, combining safety and performance in a compact form. Powered by a 121cc four-stroke engine, this model provides reliable performance with a focus on fuel efficiency and reduced emissions, making it an environmentally conscious choice for young riders. The snowmobile features a single-speed transmission, which simplifies operation and helps new riders gain confidence in handling snow-covered terrains. With a 10-inch front suspension travel and a rear suspension travel of 7.1 inches, the Indy 120 ensures a smooth ride over uneven surfaces, enhancing stability and comfort.

Safety is a priority in the design of the Polaris Indy 120, which includes a safety tether and an adjustable throttle to limit speed, allowing parents to set appropriate limits for their children’s skill levels. The snowmobile's lightweight chassis, weighing approximately 147 pounds, contributes to its ease of maneuverability, making it ideal for younger users. The design features a durable body with a sleek aesthetic, incorporating elements from Polaris's full-size models, ensuring a modern and appealing look.

The Indy 120 is equipped with a 0.5-gallon fuel tank, which supports extended play sessions without frequent refueling. The model also features a maintenance-free battery, reducing upkeep requirements for families. With its comfortable seating and easy-to-use controls, the Polaris Indy 120 is crafted to provide a fun and educational introduction to snowmobiling, ensuring young riders develop their skills in a safe and controlled manner. This snowmobile stands out as an ideal entry-level vehicle for children eager to explore snowy landscapes with the thrill of riding a snowmobile.

Polaris Indy 120 F.A.Q.

How do I start the Polaris Indy 120 snowmobile?

To start the Polaris Indy 120, ensure the safety tether is attached, turn the ignition key to the 'ON' position, and pull the recoil starter handle firmly until the engine starts.

What type of fuel should I use for my Polaris Indy 120?

Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than E10.

How often should I change the engine oil on the Polaris Indy 120?

Change the engine oil every 50 hours of operation or at the start of each season, whichever comes first.

What is the recommended tire pressure for the Polaris Indy 120?

The Polaris Indy 120 uses skis instead of tires. Ensure the ski runners are in good condition and replace them if worn.

How do I adjust the chain tension on my Polaris Indy 120?

To adjust the chain tension, loosen the axle adjuster lock nuts, turn the adjuster bolts to achieve proper tension, and retighten the lock nuts.

What should I do if my Polaris Indy 120 won't start?

Check for fuel in the tank, ensure the safety tether is connected, verify the ignition switch is on, and inspect the spark plug for damage or fouling.

How do I store the Polaris Indy 120 for the off-season?

Clean the snowmobile thoroughly, add fuel stabilizer to the tank, change the oil, lubricate moving parts, and store it in a dry, cool place.

What is the break-in procedure for a new Polaris Indy 120?

During the first 10 hours, avoid prolonged operation at full throttle, vary the engine speed, and avoid aggressive driving to allow proper engine break-in.

How can I improve the performance of my Polaris Indy 120?

Regular maintenance, using high-quality gasoline, and keeping the snowmobile clean and well-lubricated can help maintain and slightly improve performance.

How do I replace the spark plug on the Polaris Indy 120?

First, remove the spark plug cap, then use a spark plug socket to unscrew and remove the old plug. Install the new plug by hand, then tighten it with the socket. Ensure the gap is set correctly.