Polaris 600 IQ Widetrak v6 Owner's Manual
![Polaris 600 IQ Widetrak 2012 manual cover](/images/8e503594037834cca926f5d5/thumbs/thumb175x175.webp)
To start the Polaris 600 IQ Widetrak 2012 in cold weather, ensure the choke is fully engaged, turn the ignition key to the start position, and allow the engine to warm up for a few minutes before disengaging the choke.
The oil should be changed every 1,000 miles or once a season, whichever comes first. Regular oil checks should be conducted to ensure optimal performance.
It is recommended to use a 50/50 mixture of antifreeze and distilled water to ensure proper cooling system performance.
If the electric start is not working, check the battery connections for corrosion or looseness, ensure the battery is fully charged, and inspect the starter solenoid and starter motor for functionality.
The track tension should be adjusted so that there is approximately 3/4 inch of slack when you apply 10 pounds of pressure to the track.
Improving fuel efficiency can be achieved by regularly maintaining the engine, ensuring the drive belt is in good condition, and avoiding aggressive acceleration.
If the engine overheats, immediately shut it down, allow it to cool, check the coolant levels, and inspect for any leaks or blockages in the cooling system.
To replace the spark plugs, remove the spark plug cap, use a spark plug socket to unscrew the old plug, insert the new spark plug, and tighten it to the manufacturer's specifications before reattaching the cap.
For off-season storage, clean and dry the snowmobile thoroughly, stabilize the fuel, disconnect the battery, and store it in a cool, dry place covered with a breathable snowmobile cover.
Adjust the suspension by modifying the preload on the springs and adjusting the shock absorber settings according to the terrain and load requirements. Refer to the owner’s manual for specific adjustment instructions.