Polaris 120 Indy v7 Owner's Manual
![Polaris 120 Indy 2015 manual cover](/images/8e769219819d36bc4d9ee907/thumbs/thumb175x175.webp)
Ensure the choke is fully engaged before starting. If it doesn't start after a few attempts, check the spark plug and ensure the fuel system is not clogged.
Use a high-quality 2-stroke engine oil specifically designed for snowmobiles, as recommended by Polaris.
Regular maintenance such as cleaning the carburetor, replacing the air filter, and ensuring the spark plug is in good condition can help improve fuel efficiency.
Check the fuel level, ensure the choke is properly set, inspect the spark plug for wear, and verify that the fuel line is not blocked.
It's recommended to check and potentially replace the spark plug every season or after every 50 hours of use for optimal performance.
The recommended tire pressure is typically around 4 to 5 PSI. Always check the manual for specific guidelines.
Ensure the track is properly tensioned by lifting the rear end and checking if the track lifts 1 to 1.5 inches off the ground when pressure is applied. Adjust tensioners as needed.
Regular inspections should include the drive belt, track condition, suspension systems, and lubrication points.
Clean the snowmobile thoroughly, stabilize the fuel, remove the battery, and store it in a dry, cool place covered with a breathable cover.
Stop the engine immediately and allow it to cool. Check for coolant leaks and ensure the cooling system is functioning properly.