Onkyo DP X1A Instruction Manual

To update the firmware, ensure your device is connected to Wi-Fi. Go to Settings > About > System Update and check for any available updates. Follow the on-screen instructions to download and install the update.
First, ensure the device is fully charged. Connect it to a power source using the original charger and cable. If it still doesn't turn on, press and hold the power button for 10 seconds to perform a hard reset.
To improve battery life, reduce screen brightness, disable Wi-Fi and Bluetooth when not in use, and close unused apps running in the background. Additionally, keep the firmware up to date for optimal performance.
The Onkyo DP X1A supports a wide range of audio formats, including MP3, WAV, FLAC, ALAC, MQA, DSD, and AIFF, among others.
Yes, the Onkyo DP X1A can be used as a USB DAC. Connect it to a computer via USB, and select USB DAC mode in the device settings.
To reset the device to factory settings, go to Settings > Backup & reset > Factory data reset and follow the on-screen instructions. This will erase all data on the device, so ensure you have a backup.
Ensure the microSD card is properly inserted and is formatted to FAT32 or exFAT. If the issue persists, try using a different microSD card or reformat the current card using a computer.
Enable Bluetooth on the DP X1A by going to Settings > Bluetooth and toggle it on. Make sure your headphones are in pairing mode, then select them from the list of available devices on the DP X1A.
Use a soft, lint-free cloth slightly dampened with water or a screen cleaning solution. Gently wipe the screen in a circular motion to avoid scratching.
Connect the DP X1A to your computer using a USB cable. Once connected, select 'File Transfer' mode on the device. Drag and drop music files from your computer to the appropriate folder on the DP X1A.