Onkyo CS-355 Instruction Manual
![Onkyo CS-355 manual cover](/images/c3b5d6d85d3e2be0bf49b900/thumbs/thumb175x175.webp)
To connect your Onkyo CS-355 to a Bluetooth device, ensure that both the Bluetooth function on the CS-355 and your device are turned on. Set the CS-355 to Bluetooth mode and select 'Onkyo CS-355' from the list of available devices on your Bluetooth device.
First, ensure that the disc is clean and free from scratches. If the issue persists, try a different disc. Check that the CD is inserted correctly and ensure that the CD format is compatible. If the problem continues, it may require servicing.
To reset the Onkyo CS-355 to factory settings, turn off the unit. Then, while holding down the STOP button on the main unit, press the POWER button. Release the STOP button once 'Clear' appears on the display.
Ensure the speakers are properly connected and the volume is turned up. Check that the correct input source is selected and that the mute function is not activated. If using external devices, ensure they are properly connected and functioning.
The Onkyo CS-355 does not support firmware updates through USB or network connections. Ensure your device is functioning correctly and refer to the user manual for any specific operational guidance.
Yes, you can connect the Onkyo CS-355 to a TV using an auxiliary cable or RCA cables. Ensure that the TV output is connected to the AUX input on the CS-355. Adjust the input settings accordingly.
To clean your Onkyo CS-355, use a soft, dry cloth to wipe the exterior. Avoid using any abrasive materials or solvents. For the CD player, use a lens cleaning disc if necessary.
To improve FM radio reception, ensure the FM antenna is fully extended and positioned for optimal reception. Moving the unit closer to a window or away from other electronic devices may also help.
Yes, the Onkyo CS-355 has a headphone jack located on the front panel. Simply plug in your headphones, and the speakers will automatically mute. Adjust the volume as needed.
To set the sleep timer, press the SLEEP button repeatedly on the remote control until the desired time appears on the display (up to 90 minutes). The system will automatically turn off after the specified time.