Onkyo CS 245BT Instruction Manual
![Onkyo CS 245BT manual cover](/images/6b1e9c0e1f595116e9c3543d/thumbs/thumb175x175.webp)
To pair your Bluetooth device with the Onkyo CS-245BT, first ensure the system is in Bluetooth mode. Press the Bluetooth button on the remote or the main unit. Enable Bluetooth on your device and search for "Onkyo CS-245BT" in the available devices list. Select it to pair and connect.
If the CD does not play, check that the CD is inserted correctly with the label side facing up. Ensure the CD is clean and free of scratches. Try a different CD to see if the issue persists. If it does, the lens may need cleaning or there may be a hardware issue.
To reset the Onkyo CS-245BT to factory settings, turn off the unit and then press and hold the "Stop" button on the unit while turning it back on. This will reset the system and clear any stored settings.
Ensure that the volume is turned up and not muted. Check the speaker connections to make sure they are secure. Verify the input source is correct and functioning. If using Bluetooth, ensure the device is connected.
Use the "Input" button on the remote or the main unit to cycle through available input sources like CD, FM, USB, and Bluetooth. Each press will switch to the next input.
To clean the Onkyo CS-245BT, use a soft, dry cloth. Avoid using any chemical cleaners or solvents. For the CD lens, use a CD lens cleaning disc if you experience playback issues.
To improve FM radio reception, ensure the FM antenna is fully extended and positioned vertically. You may also try repositioning the unit or moving it closer to a window.
Yes, you can play MP3 files from a USB drive. Insert the USB drive into the USB port and use the "Input" button to select USB mode. Use the controls to navigate and play your tracks.
Check the batteries in the remote control and replace them if necessary. Ensure there are no obstructions between the remote and the unit. If the problem persists, try resetting the remote by removing the batteries and pressing all buttons to discharge it.
To set the clock, press and hold the "Clock" button until the hour begins to flash. Use the "Up" and "Down" buttons to set the hour, then press "Clock" again to set the minutes. Adjust the minutes in the same way and press "Clock" once more to confirm.