Onkyo CR 555, CR 555DAB Instruction Manual
![Onkyo CR 555, CR 555DAB manual cover](/images/20e0f053af2ae56cebe52a40/thumbs/thumb175x175.webp)
To reset the Onkyo CR-555 to factory settings, turn off the unit. Then, press and hold the [STANDBY/ON] button while pressing the [STOP] button until "CLEAR" appears on the display. Release the buttons to complete the reset process.
First, check if the power cord is correctly connected to both the unit and the power outlet. Ensure the outlet is working by testing it with another device. If the issue persists, try resetting the unit. If it still does not turn on, contact Onkyo support for further assistance.
To improve DAB radio reception, ensure the DAB antenna is fully extended and positioned vertically. Try relocating the unit to a different position or room where signal reception is stronger. Avoid placing the unit near electronic devices that may cause interference.
Yes, you can stream music from your smartphone to the Onkyo CR-555 using Bluetooth or an auxiliary cable. Ensure Bluetooth is enabled on both devices and pair them. Alternatively, connect your smartphone to the AUX-IN port using a suitable cable.
Check the speaker connections to ensure they are properly connected to the unit. Verify that the correct input source is selected and that the volume is turned up. Also, check if the mute function is activated and turn it off if necessary.
Visit the Onkyo website to check for the latest firmware updates available for the CR-555DAB. Follow the instructions provided to download and install the firmware update using a USB drive or through the network if supported.
Regularly dust the exterior with a soft, dry cloth. Avoid using chemical cleaners. Ensure the ventilation openings are unobstructed. Check and tighten speaker connections periodically. If not used for extended periods, disconnect from the power outlet.
To connect external speakers, use speaker cables to connect the speaker terminals on the back of the CR-555 to the terminals on your speakers. Ensure the polarity (+/-) is consistent on both the unit and the speakers.
Ensure the disc is inserted correctly with the label facing up. Check the disc for scratches or dirt and clean it if necessary. Try playing a different disc to see if the issue persists. If the problem continues, the laser lens may need cleaning or servicing.
Press the [SETUP] button on the remote control and navigate to the alarm settings. Set the desired alarm time and select the source, such as FM, DAB, or CD. Finally, confirm the settings to activate the alarm.