Onkyo CR-245, CS-345 Instruction Manual
![Onkyo CR-245, CS-345 manual cover](/images/b36e4ed7277724ad4e4ccf00/thumbs/thumb175x175.webp)
To connect your Onkyo CR-245 to a Bluetooth device, ensure the Bluetooth function is activated on your device. Press the 'Bluetooth' button on the CR-245 to enter pairing mode, then select 'Onkyo CR-245' from your device's Bluetooth menu.
Check the power cable connection and ensure it's plugged into a working outlet. Inspect the fuse in the plug and replace it if necessary. If the unit still does not turn on, consult the user manual or contact Onkyo support.
To reset the Onkyo CR-245 to factory settings, press and hold the 'Power' button for about 5 seconds until 'Clear' appears on the display. This will reset all settings to their defaults.
Ensure the speakers are properly connected to the unit. Check the volume level and make sure the unit is not on mute. Verify that the correct input source is selected and that the audio cables are secured.
Yes, the Onkyo CR-245 supports MP3 playback. You can play MP3 files from a USB device or a CD containing MP3 files.
Clean the exterior with a soft, dry cloth. Avoid using chemicals or abrasive cleaners. Regularly check and clean the speaker connections to prevent dust build-up.
To improve FM reception, extend the FM antenna and position it for the best signal reception. You may also try placing the unit near a window or away from other electronic devices.
To set the alarm, press the 'Alarm' button and use the 'Up' and 'Down' buttons to set the desired alarm time. Confirm the time and select your desired alarm source, such as radio or CD.
First, check for any obstructions in the CD tray. If none are found, try powering off the unit and unplugging it for a few minutes before trying again. If the problem persists, seek professional servicing.
Check Onkyo's official website for any available firmware updates for your model. Follow the instructions provided with the update file, usually involving transferring the update to a USB stick and connecting it to the unit.