Nissan NV1500 2020 Owner's Manual
![Nissan NV1500 2020 manual cover](/images/780990906b1e8fc2a6bffdaa/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the "Trip" button until the maintenance interval appears. Press and hold the "Trip" button until the light resets.
The recommended tire pressure for the 2020 Nissan NV1500 is typically 35 PSI for both front and rear tires. Always check the owner's manual or the placard on the driver's side door jamb for specific information.
To replace the cabin air filter, locate the filter housing behind the glove box. Open and remove the glove box, then unclip the filter cover. Remove the old filter and insert the new one, ensuring correct orientation. Replace the cover and glove box.
For optimal performance, use SAE 5W-30 synthetic oil. Always refer to the owner's manual for the manufacturer's recommendations.
Check the battery terminals for corrosion and ensure they're tight. Verify the battery charge and inspect fuses related to the ignition system. If the problem persists, consult a professional mechanic.
The 2020 Nissan NV1500 has a towing capacity of up to 6,900 pounds when properly equipped. Always ensure your vehicle is configured with the necessary towing package.
To connect your phone, enable Bluetooth on your device. On the vehicle’s audio system, select "Phone," then "Connect," and choose "Add New." Follow the prompts to pair your phone.
Brake pads should be inspected every 10,000 miles and typically replaced between 20,000 to 50,000 miles, depending on driving habits and conditions. Refer to the owner's manual for more specific guidance.
Common causes include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or spark plug/coil failure. It's advisable to have the vehicle scanned for trouble codes to pinpoint the issue.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the electrical connector and turn the bulb counterclockwise to remove it. Insert the new bulb, secure it by turning clockwise, and reconnect the electrical connector.