Montpellier MFF175W Installation Instructions

To set the temperature, use the thermostat dial inside the refrigerator. For optimal cooling, set it to the middle setting and adjust as needed depending on the ambient temperature and load.
Check if the thermostat is set correctly, ensure the door seals are clean and intact, and verify that there is adequate ventilation around the appliance. If the problem persists, consider contacting a service technician.
Defrost the freezer compartment when the frost build-up reaches about 3-5 mm thickness to maintain efficiency and performance.
Unplug the refrigerator, remove all food items, and use a mild detergent with warm water to clean the interior. Rinse with clean water and dry before plugging back in.
Store food in airtight containers, avoid keeping expired items, clean spills promptly, and consider placing an open box of baking soda inside to absorb odors.
Check if the refrigerator is level and ensure it is not touching any adjacent surfaces. Also, verify that nothing inside is vibrating against the walls. If the noise persists, contact support.
Unplug the refrigerator, remove the light cover by unscrewing it, and replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Place raw meat on the lower shelves, dairy products in the middle, and use the door for items less sensitive to temperature changes. Keep airflow unobstructed for even cooling.
Ensure the door seals are tight, keep the refrigerator away from heat sources, let hot food cool before placing it inside, and regularly clean the condenser coils.
Check for obstructions or food items blocking the door. Inspect the door seals for damage or dirt and clean them if necessary. Adjust the leveling legs to ensure the unit is stable.