Montpellier MBUR201 Installation Instructions
![Montpellier MBUR201 Refrigerator manual cover](/images/MvaeIlhWCaZjYfUUwMbTUsoZ/thumbs/thumb175x175.webp)
To change the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to adjust the temperature to your desired setting. The recommended temperature for the refrigerator compartment is around 37°F (3°C).
First, ensure the refrigerator is plugged in and the circuit breaker is not tripped. Check if the temperature settings are correct and ensure the vents inside the fridge are not blocked. If problems persist, consider cleaning the condenser coils or contacting customer support.
The Montpellier MBUR201 is a frost-free model, so manual defrosting is not required. However, if you notice ice build-up, ensure the door seals are intact and not obstructed.
To clean the interior, turn off the fridge and remove all food items. Use a mild detergent mixed with warm water to wipe down all surfaces. Rinse with a clean, damp cloth and dry thoroughly before restocking.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the door seals clean and tight, and avoid opening the door frequently. Set the thermostat to the recommended temperature.
Some noise is normal, but if you hear unusual sounds, check if the fridge is level and stable. Ensure it is not touching the wall or other objects. If the noise persists, contact a service technician.
To replace the light bulb, unplug the refrigerator and remove the bulb cover inside the fridge. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the cover and plug the fridge back in.
Check if the door seals are clean and free of debris. Ensure that the fridge is level, and adjust the leveling feet if necessary. Also, make sure that no items inside are obstructing the door.
Yes, the door swing direction can be changed. Refer to the user manual for detailed instructions. It typically involves unscrewing the hinges and repositioning them on the opposite side.
After a power outage, simply plug the refrigerator back in. The unit should resume normal operation. If there are issues, check the control panel to ensure settings are correct.