Montpellier MAB2035 Installation Instructions

To adjust the temperature, locate the thermostat dial inside the fridge compartment. Turn the dial clockwise to lower the temperature and counter-clockwise to increase it.
Check if the thermostat is set to the correct temperature, ensure the door seals are clean and not damaged, and verify that the refrigerator is not overloaded. If the problem persists, consider contacting a service technician.
It's recommended to defrost your refrigerator when the frost build-up reaches about 1/4 inch (6mm) to maintain efficiency and performance.
Yes, the door swing direction can be changed. Refer to the user manual for detailed instructions or contact a professional for assistance.
Use a mixture of mild detergent and warm water to clean the interior. Avoid using abrasive cleaners. Rinse with clean water and dry with a soft cloth.
Unplug the refrigerator, remove the light cover, unscrew the bulb, and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
This could be due to a blocked defrost drain. Try clearing the drain using warm water or a pipe cleaner. If the issue persists, consult a technician.
Ensure the refrigerator is level, and check that it is not touching the wall or other objects that might cause vibrations. If noise continues, it may require professional inspection.
Inspect the seal for damage or dirt, clean it with warm soapy water, and ensure the door is properly aligned. If necessary, replace the seal.
To reset the alarm, simply press the alarm reset button on the control panel. If the alarm continues, check for any unresolved issues such as door ajar or temperature fluctuations.