Mitsubishi Electric FX2N 232 BD User's Guide

Mitsubishi Electric FX2N 232 BD manual cover
Pages 4
Year 2015
Language(s)
English en

Mitsubishi Electric FX2N 232 BD Specification

The Mitsubishi Electric FX2N-232-BD is a communication expansion board designed for the FX2N series of programmable logic controllers (PLCs). This module enhances the communication capabilities of the base PLC by providing an additional RS-232 serial interface, allowing for seamless integration with a variety of peripheral devices such as printers, barcode readers, and other RS-232 compatible equipment. The FX2N-232-BD module is compact and easily mounts onto the FX2N main unit, ensuring minimal disruption to existing setups. It supports data transmission speeds ranging from 300 to 19200 bps, offering flexibility for different application requirements. The module operates at a standard voltage of 5V DC, supplied directly from the PLC, eliminating the need for external power sources. It supports a range of communication protocols, including ASCII and Mitsubishi’s dedicated protocol, enhancing its versatility in industrial environments. The FX2N-232-BD is engineered to handle demanding industrial conditions, with robust performance across a range of temperatures and humidity levels typical in factory settings. It includes a built-in LED indicator for status monitoring, aiding in quick diagnostics and troubleshooting. The board is compatible with various software tools provided by Mitsubishi Electric, facilitating easy configuration and integration into existing systems. This capability allows for streamlined data exchange and control processes, optimizing operational efficiency. The FX2N-232-BD is a reliable choice for expanding the communication capabilities of Mitsubishi’s FX2N PLCs, ensuring enhanced data handling and connectivity in complex industrial automation systems.

Mitsubishi Electric FX2N 232 BD F.A.Q.

How do I connect the Mitsubishi Electric FX2N 232 BD to a PC for programming?

To connect the FX2N 232 BD to a PC, you need a compatible RS-232 cable and appropriate driver software installed on your PC. Connect the cable to the communication port on the FX2N 232 BD and the RS-232 port on your PC.

What should I do if the FX2N 232 BD is not communicating with other devices?

Check the connections and ensure that all cables are securely connected. Verify the communication settings such as baud rate, parity, and stop bits in the software and ensure they match the settings on the connected devices.

How can I troubleshoot common errors on the FX2N 232 BD?

Refer to the error code list in the user manual. Common steps include checking power supply, verifying connections, and ensuring that the configuration settings are correct. Perform a reset if necessary.

What is the maximum cable length allowed for the RS-232 connection on the FX2N 232 BD?

The maximum cable length for RS-232 connections is typically 15 meters (50 feet). However, it can vary depending on the cable quality and environmental conditions.

How often should I perform maintenance on the FX2N 232 BD?

Regular maintenance should be performed every 6 to 12 months, including inspecting connections, checking for physical damage, and verifying the operation of the unit under load conditions.

Can the FX2N 232 BD be used with third-party software?

Yes, the FX2N 232 BD can be used with third-party software that supports the required communication protocols. Ensure compatibility and verify with the software provider.

What precautions should be taken when installing the FX2N 232 BD?

Ensure that the device is installed in a clean, dry environment with adequate ventilation. Avoid exposure to excessive heat, moisture, and dust. Ensure proper grounding to prevent electrical interference.

How do I update the firmware on the FX2N 232 BD?

Firmware updates are typically provided by Mitsubishi Electric. Follow the instructions provided with the update, using the appropriate software tools to upload the new firmware version to the device.

Is it possible to expand the communication capabilities of the FX2N 232 BD?

Yes, the FX2N 232 BD can be expanded with additional modules to support various communication protocols such as Ethernet or Profibus, depending on the specific requirements.

What should I do if the FX2N 232 BD requires repair?

Contact an authorized Mitsubishi Electric service center for repairs. Avoid attempting repairs yourself as it may void the warranty and cause further damage.