Miele KWT 2662 ViS Operating and Installation Instructions
![Miele KWT 2662 ViS Refrigerator manual cover](/images/ybpmRAStckHbKPYAEVQHxMQW/thumbs/thumb175x175.webp)
To adjust the temperature settings, navigate to the control panel located inside the refrigerator. Use the arrow buttons to increase or decrease the temperature until the desired setting is displayed.
Check to ensure that the refrigerator is level and that there are no loose items inside. If noises persist, inspect the fan and compressor for any obstructions or signs of wear.
Locate the water filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it, and replace it with a new filter by turning it clockwise until secure.
Ensure the door is closing properly and the seals are intact. Check if the temperature settings are correct. If the problem persists, clean the condenser coils and ensure adequate ventilation around the unit.
Remove all items and shelves. Use a mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry thoroughly before replacing shelves and items.
Yes, the door swing can be reversed. Refer to the user manual for detailed instructions or contact Miele customer service for assistance.
Regularly clean the condenser coils, check and replace water filters, and inspect door seals for wear. Ensure the refrigerator is level and has adequate ventilation.
Press and hold the filter reset button on the control panel for 5 seconds until the indicator light turns off.
Check the water supply line to ensure it is connected and not kinked. Verify that the ice maker is turned on and the freezer compartment is at the correct temperature.
Keep the refrigerator away from heat sources and direct sunlight. Ensure the door seals are tight and minimize door openings. Regularly clean the condenser coils to maintain efficiency.