Miele KWT 2602 Vi Operating and Installation Instructions
![Miele KWT 2602 Vi Refrigerator manual cover](/images/haxJoTVuJeVMikdFCCwwvxwZ/thumbs/thumb175x175.webp)
To adjust the temperature, navigate to the control panel on the interior of the unit. Use the touch controls to select the desired compartment and set the temperature using the '+' or '-' buttons.
First, ensure the doors are closing properly and the seals are intact. Check the temperature settings and make sure the vents inside the refrigerator are not blocked. If the problem persists, contact Miele customer support for further assistance.
To change the interior light, first unplug the refrigerator. Gently remove the light cover and replace the old bulb with a new one of the same type and wattage. Reattach the cover and plug the unit back in.
While it is possible to install the refrigerator yourself, it is recommended to have it installed by a professional to ensure proper setup and avoid any issues with warranty.
It is recommended to clean the condenser coils at least once a year to ensure efficient operation. Use a vacuum or soft brush to remove dust and debris.
Water leaks can be caused by a blocked defrost drain or a damaged water line. Check these areas for blockages or damages and clean or repair them as necessary.
To activate Sabbath Mode, press and hold the designated button on the control panel for a few seconds until the display indicates that Sabbath Mode is active. This mode disables interior lights and alarms.
Regular maintenance includes cleaning the interior and exterior surfaces, checking and cleaning door seals, and ensuring the condenser coils are free of dust and debris.
After replacing the water filter, press and hold the filter reset button on the control panel until the indicator light resets. Refer to the user manual for specific button locations.
Store items according to their temperature needs: keep meats and dairy on the lower shelves, fruits and vegetables in the crisper drawers, and condiments and drinks on the door shelves. Ensure proper airflow by not overcrowding the interior.