Miele DA 6698 D Puristic Version 6000 Operating Instructions
![Miele DA 6698 D Puristic Version 6000 Hood manual cover](/images/HbjCeQoVNwkZqeefYpbtZQrq/thumbs/thumb175x175.webp)
To install the Miele DA 6698 D hood, follow the installation manual provided with the unit. Ensure that you have the necessary tools and support to safely mount the hood. The hood should be installed by a qualified technician to ensure proper ventilation and safety compliance.
The grease filters should be manually cleaned every 3-4 weeks. Remove the filters from the hood and wash them in a dishwasher or with warm water and mild detergent. Allow them to dry completely before reinstalling.
Unusual noises can be caused by loose components or debris in the fan. Ensure that all parts are securely fastened and check for any obstructions in the ventilation ducts. If the problem persists, contact a service technician.
To change the light bulb, first disconnect the hood from the power supply. Remove the light cover and replace the bulb with a new one of the same type and wattage. Reattach the cover and reconnect the power.
Check the power connection to ensure the hood is receiving electricity. If the controls are still unresponsive, reset the hood by turning off the power for a few minutes and then turning it back on. If issues persist, contact customer support.
To reset the hood, switch off the power at the main power supply for at least 30 seconds, and then switch it back on. This can help resolve minor electronic issues.
Regularly clean the filters and the hood surface to prevent grease buildup. Inspect the ductwork for obstructions and ensure the fan and lights are functioning properly. Scheduled maintenance by a professional technician is recommended annually.
Yes, the Miele DA 6698 D hood can be used in recirculating mode. You will need to install a recirculation kit and replace the grease filters with charcoal filters to effectively remove odors.
Use the control panel to adjust the fan speed. Increasing the fan speed will enhance the suction power. Ensure the filters are clean, as clogged filters can reduce efficiency.
Used grease filters can be cleaned and reused. However, if replacing charcoal filters for recirculation, dispose of them according to local waste management regulations, as they contain activated carbon.