Miele CVA 7370 Operating and Installation Instructions
![Miele CVA 7370 Coffee Machine manual cover](/images/NwZjNBkpddcNDeuxHnflaVMe/thumbs/thumb175x175.webp)
To descale the Miele CVA 7370, start by accessing the maintenance menu on the machine. Select the descaling option, then follow the on-screen instructions, which will guide you through adding the descaling solution and starting the process.
First, ensure that the water reservoir is full and properly seated. Check that the coffee bean container is not empty. If the problem persists, try cleaning the brew unit and checking for any blockages in the coffee spout.
To adjust the coffee strength, navigate to the coffee settings menu on your machine. From there, you can select the desired strength level and save your preference for future brews.
Regular maintenance includes descaling the machine, cleaning the brew unit, emptying the drip tray and waste container, and wiping down the exterior. Refer to the user manual for specific intervals.
Ensure that the waste container is properly inserted. Try removing and reinserting it. If the message persists, clean the sensors located in the waste container compartment.
Start by connecting the machine to a power source. Fill the water reservoir and coffee bean container. Then, follow the on-screen setup instructions to select language, water hardness, and other initial settings.
Check that the milk container is connected correctly and that the milk tube is not blocked. Clean the milk system components according to the manual. Ensure the milk is fresh and at the correct temperature.
To reset the machine, go to the settings menu, select 'Factory Reset', and confirm your choice. This will restore the original settings and clear any personalized configurations.
A loud noise may indicate a blockage or issue with the grinder. Check for any obstructions in the coffee bean container or grinder. If necessary, contact Miele customer support for further assistance.
It is recommended to clean the brew unit once a week to ensure optimal performance and hygiene. Remove it from the machine, rinse under warm water, and allow it to dry before reinserting.