Mercedes-Benz SLC 2017 Operator's Manual
![Mercedes-Benz SLC 2017 manual cover](/images/6756a0b19e7bea96dc3fd78e/thumbs/thumb175x175.webp)
To reset the service indicator, turn the ignition to position 1. Use the steering wheel buttons to navigate to the trip meter screen. Press and hold the 'Accept Call' button and the 'OK' button simultaneously for a few seconds. Navigate to 'Assist Plus' and select 'Full Service', then confirm the reset.
The 2017 Mercedes-Benz SLC typically requires synthetic oil that meets the MB 229.5 specification. It's recommended to use 5W-40 or 0W-40 grade oil for optimal performance.
To pair your smartphone, ensure Bluetooth is activated on your device. On the car's infotainment system, navigate to 'Telephone', then 'Connect Device'. Select your phone from the list of available devices and confirm the pairing code on both your phone and the car's screen.
The recommended tire pressure for the 2017 Mercedes-Benz SLC is typically 32 PSI for the front tires and 35 PSI for the rear tires. Always check the driver's side door jamb for the exact specifications.
If the navigation system is not working, try restarting the infotainment system by turning it off and on again. Check for any software updates needed. If the problem persists, consult the owner’s manual or contact a Mercedes-Benz dealer for further assistance.
Squeaking noises during braking could be due to worn brake pads or rotors. Inspect the brake pads for wear and replace them if necessary. If the rotors are damaged, they may need resurfacing or replacement.
The air filter in a 2017 Mercedes-Benz SLC should typically be replaced every 15,000 to 20,000 miles. However, if you drive in dusty or polluted environments, it may require more frequent replacement.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If the light remains on, it’s advisable to have the vehicle diagnosed with an OBD-II scanner or visit a certified Mercedes-Benz technician to identify the issue.
To enable the ECO start/stop function, ensure the system is activated via the ECO button on the center console. The function is automatically enabled when the vehicle is started unless manually deactivated.
Regular maintenance for the convertible top includes cleaning it with a soft brush and mild detergent, ensuring the seals are lubricated, and checking for any signs of wear or damage. It’s also important to operate the top periodically to keep the mechanisms in good condition.