Mercedes-Benz SL 2016 Operator's Manual

To reset the tire pressure monitoring system, turn the ignition to position 2. Use the steering wheel buttons to navigate to the 'Service' menu, select 'Tire Pressure', and confirm the reset option.
Mercedes-Benz recommends using synthetic motor oil with a viscosity of 5W-40 or 0W-40 for the 2016 SL model. Always check the owner's manual for specific oil specifications.
To connect your phone, enable Bluetooth on your device, then use the vehicle's COMAND system to search for devices. Select your phone from the list and follow the prompts to complete the pairing process.
The recommended tire pressure is typically 36 psi for front tires and 39 psi for rear tires, but it's important to refer to the placard on the driver's door jamb for exact specifications.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the bulb connector, and replace the old bulb with a new one. Ensure it is securely fitted before reattaching the cover.
Engine overheating can be caused by a low coolant level, a faulty thermostat, a clogged radiator, or a malfunctioning cooling fan. Check these components and consult a professional mechanic if necessary.
To update the navigation system, check for updates on the Mercedes-Benz website. Download the update to a USB drive, insert it into the vehicle's USB port, and follow the on-screen instructions in the COMAND system.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements. Maintain proper tire pressure, drive conservatively, and remove unnecessary weight from the vehicle.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If the light stays on, use an OBD-II scanner to retrieve the error codes or visit a qualified mechanic for diagnosis.
To change the cabin air filter, locate the filter housing under the dashboard on the passenger side. Remove the cover, take out the old filter, and install the new one. Ensure the filter is oriented correctly, and replace the cover.