Mercedes-Benz M-Class 2015 Operator's Manual
![Mercedes-Benz M-Class 2015 manual cover](/images/07b7a3ca4d1470e2d4e639de/thumbs/thumb175x175.webp)
To reset the service indicator light, turn the ignition to position one (do not start the engine), use the arrow buttons on the steering wheel to navigate to the mileage menu, press and hold the "OK" button and the call button simultaneously, then select 'Full Service' and confirm the reset.
The 2015 Mercedes-Benz M-Class typically requires synthetic motor oil with a viscosity rating of 5W-40 or 0W-40 meeting the MB 229.5 specification. Always consult the owner's manual for specific recommendations.
The recommended tire pressure for the 2015 Mercedes-Benz M-Class is generally 32 PSI for the front tires and 35 PSI for the rear tires. Refer to the sticker inside the driver's door frame for precise specifications.
To connect your smartphone via Bluetooth, turn on the vehicle's ignition, enable Bluetooth on your phone, select 'Telephone' on the COMAND system, choose 'Connect Device', and follow the prompts to pair your phone.
If the navigation system is not working, try rebooting the COMAND system by pressing and holding the power button for 10 seconds. If the issue persists, check for system updates or consult your dealer.
To replace the key fob battery, remove the mechanical key by sliding the release switch, use the key to gently open the battery compartment, and replace the old battery with a new CR2025 battery. Ensure the battery polarity is correct.
The 2015 Mercedes-Benz M-Class has a towing capacity of up to 7,200 pounds, depending on the model and configuration. Always refer to the owner's manual for detailed towing guidelines.
To change the air filter, open the hood, locate the air filter housing, unclip the housing cover, remove the old air filter, insert the new filter, and re-secure the housing cover. Ensure the filter is positioned correctly.
The check engine light could be due to a variety of issues, such as a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It's recommended to use an OBD-II scanner to identify specific error codes.
Transmission fluid should be checked regularly and replaced approximately every 40,000 to 60,000 miles, depending on driving conditions. Always refer to the service manual for specific maintenance intervals.