Mercedes-Benz GLK-Class 2013 Operator's Manual
![Mercedes-Benz GLK-Class 2013 manual cover](/images/68cef6116817961382f9822c/thumbs/thumb175x175.webp)
To reset the service indicator, turn the ignition to position 1. Use the arrow buttons on the steering wheel to navigate to the service menu. Press the OK button until the service confirmation message appears, then select 'Confirm' and press OK again.
Mercedes-Benz recommends using synthetic oil with a viscosity of 5W-40 or 0W-40 that meets MB 229.5 specification for the GLK-Class 2013.
First, check the refrigerant level and ensure there are no leaks. Inspect the A/C compressor and ensure the fuse is not blown. If the problem persists, consult a professional mechanic.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the electrical connector, and remove the old bulb. Insert the new bulb, reconnect the connector, and replace the cover.
The recommended tire pressure for the 2013 GLK-Class is typically 32 PSI for both front and rear tires. Always refer to the placard located on the driver’s side door jamb for exact specifications.
It is recommended to change the transmission fluid every 40,000 miles or as specified in your owner's manual to ensure optimal performance.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or catalytic converter issues. It is advisable to have the vehicle scanned for error codes to determine the exact cause.
To pair your phone, turn on Bluetooth on your phone and navigate to the Bluetooth settings in your GLK's infotainment system. Select 'Add new device' and choose your phone from the list. Enter any required passcodes to complete pairing.
Regular maintenance includes oil changes every 10,000 miles, brake inspections every 20,000 miles, and a comprehensive service every 40,000 miles. Always refer to the owner's manual for detailed maintenance intervals.
To replace the battery, remove the mechanical key by sliding the release switch. Use the mechanical key to open the battery compartment by twisting it in the slot. Replace the old battery with a new CR2025 battery, ensuring the positive side faces up.