Mercedes-Benz GLE 2016 Operator's Manual
![Mercedes-Benz GLE 2016 manual cover](/images/5d29b57c44fd111347e06bd5/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to position 1. Use the left arrow button on the steering wheel to navigate to the main menu. Scroll down to 'Service' and select it. Choose 'Full Service' and follow the prompts to reset.
The 2016 Mercedes-Benz GLE typically requires synthetic engine oil with a viscosity grade of 5W-40, meeting the MB 229.5 specification. Always check the owner's manual for the correct specification.
To pair your phone, turn on Bluetooth on your device. In the GLE, access the COMAND system, select 'Phone', then 'Connect Device'. Follow the on-screen instructions to pair your phone.
To replace the air filter, open the hood and locate the air filter housing. Unclip the housing cover, remove the old air filter, and insert the new one. Ensure it is seated properly before securing the housing cover back in place.
First, ensure the navigation system is up to date. Check for any software updates via the Mercedes-Benz website. If the problem persists, try resetting the system by turning it off and on again. If these steps don't resolve the issue, consult a professional technician.
If the ESP warning light appears, it indicates a potential issue with the stability control system. Safely stop the vehicle and restart the engine. If the light remains on, seek assistance from a qualified Mercedes-Benz service center.
To change the key fob battery, remove the mechanical key by sliding the release catch. Insert the tip of the key into the opening to separate the fob halves. Replace the old battery with a new CR2025 battery, ensuring the positive side faces up. Reassemble the key fob.
Common causes include a loose fuel cap, faulty oxygen sensors, or issues with the catalytic converter. It is recommended to diagnose the issue with an OBD-II scanner or consult a professional mechanic.
To check the brake fluid, locate the brake fluid reservoir under the hood. Ensure the fluid level is between the 'MIN' and 'MAX' marks. If low, top up with the recommended brake fluid type, usually DOT 4 for the GLE.
The recommended tire pressure for a 2016 Mercedes-Benz GLE is typically 32 PSI for front tires and 35 PSI for rear tires. However, always refer to the placard on the driver's side door jamb for the exact specifications.