Mercedes-Benz GLA 2022 Operator's Manual

To connect your smartphone via Bluetooth, go to the infotainment system menu, select 'Phone', then 'Connect Device'. On your smartphone, enable Bluetooth and select the Mercedes-Benz system from the available devices list. Confirm pairing codes if prompted.
The recommended tire pressure for the Mercedes-Benz GLA 2022 is typically found on a sticker inside the driver's door frame. It usually ranges from 32 to 36 psi, but refer to the sticker for exact specifications.
To reset the service light, turn on the ignition without starting the engine. Use the steering wheel controls to navigate to the 'Service' menu, select 'Full Service', and then choose 'Confirm Service'. Follow the prompts to reset.
If the key fob battery is low, you should replace it with a new CR2032 battery. Open the key fob by sliding the release latch and gently prying it open. Replace the battery, ensuring the positive side faces up, and snap the fob back together.
To activate parking assist, press the parking assist button located on the center console. The system will scan for suitable parking spaces as you drive. Once a space is found, follow the prompts on the display to maneuver into the spot.
The recommended oil type for the Mercedes-Benz GLA 2022 is synthetic 0W-40 or 5W-40 oil that meets the MB-Approval 229.5 specification. Always check your owner's manual for the most accurate information.
To replace a headlight bulb, first turn off the engine and open the hood. Locate the headlight assembly at the front of the vehicle. Remove the cover behind the bulb, disconnect the wiring, and replace the old bulb with a new one. Reattach the cover and wiring.
To update the navigation system, you need a USB stick with at least 8GB of space. Download the update from the Mercedes-Benz website onto the USB. Insert the USB into the vehicle's USB port and follow the on-screen instructions to complete the update.
The spare tire is located in the trunk beneath the cargo floor. To access it, open the trunk, lift the cargo floor by pulling the handle, and remove the cover to reveal the spare tire and toolkit.
To adjust the seats, use the controls located on the side of the seat. Adjust the seat's position, backrest angle, and height using the respective switches. Some models come with memory settings that can be programmed for different drivers.