Mercedes-Benz G-Class 2020 Operator's Manual
![Mercedes-Benz G-Class 2020 manual cover](/images/975f13ef90e5f20bfe706fa6/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, turn on the ignition without starting the engine. Use the steering wheel controls to navigate to the 'Service' menu, select 'Tire Pressure', and then 'Reset'. Confirm the action and drive the vehicle for a few minutes to allow the system to recalibrate.
The recommended oil type for the 2020 Mercedes-Benz G-Class is synthetic 0W-40 that meets the MB 229.5 specification. Always refer to the owner's manual for the most accurate information.
To enable the ECO start/stop function, ensure that the function is activated by pressing the ECO button on the center console. The system will automatically activate when the vehicle is at a complete stop and certain conditions are met, such as a fully charged battery.
If your navigation system is not updating, check for any software updates through the Mercedes-Benz website or visit a certified dealership. Ensure that your vehicle's GPS antenna is not obstructed and perform a system reset if necessary.
To pair your smartphone, ensure Bluetooth is enabled on your device. On the vehicle's infotainment system, navigate to 'Phone', then 'Connect Device'. Select your device from the list and confirm any prompts on your phone to complete the pairing process.
To change a flat tire, safely park the vehicle on a level surface and engage the parking brake. Locate the spare tire, jack, and lug wrench. Loosen the lug nuts slightly, jack up the vehicle, remove the lug nuts completely, swap the tire, then tighten the lug nuts in a crisscross pattern. Lower the vehicle and ensure all lug nuts are securely tightened.
The air filter in a 2020 G-Class should be inspected every 10,000 miles and typically replaced every 20,000 to 30,000 miles, depending on driving conditions. Consult your owner's manual for the recommended intervals specific to your vehicle.
The 2020 Mercedes-Benz G-Class is designed to run on premium unleaded gasoline with an octane rating of 91 or higher. Using regular gasoline may affect engine performance and efficiency.
Checking the transmission fluid level in a 2020 G-Class typically requires a visit to a certified dealership, as it involves a sealed system. However, if you have access to the necessary tools, ensure the vehicle is on a level surface, and the engine is at operating temperature before checking the dipstick or fill plug.
To update the infotainment system software, visit the Mercedes-Benz official website to download the latest update onto a USB drive. Insert the USB drive into the vehicle's port, navigate to 'System Settings', select 'Software Update', and follow the on-screen instructions.