Mercedes-Benz E-Class Wagon 2017 Operator's Manual
![Mercedes-Benz E-Class Wagon 2017 manual cover](/images/70142a814bd1d49ef9418df3/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2017 E-Class Wagon, turn the ignition to position 1 (do not start the engine), scroll through the menu using the left arrow until you reach the "Service" menu, select "Full Service," and then confirm by pressing and holding the "OK" button until the light resets.
The recommended oil type for a 2017 Mercedes-Benz E-Class Wagon is SAE 0W-40, meeting the MB 229.5 specification. Always consult your owner's manual or a dealership for confirmation.
If your vehicle won't start, check the battery connections for corrosion, ensure the battery is charged, and listen for any clicking sounds that could indicate a starter issue. If the problem persists, a diagnostic tool may be needed to check for error codes.
To replace the air filter, open the hood and locate the air filter housing. Unclip the housing cover, remove the old filter, and insert the new one. Make sure it's seated properly, then reattach the housing cover securely.
To pair your phone, enable Bluetooth on your device, then access the multimedia system and navigate to "Phone" > "Connect Device" > "Search for Phones." Select your phone from the list and confirm the pairing code that appears on both screens.
Common issues include low refrigerant levels, faulty compressors, or clogged air filters. Regular maintenance and inspections can prevent these problems. For persistent issues, professional diagnostics may be necessary.
To update the navigation system, visit the Mercedes-Benz website to download the latest map updates onto a USB drive. Insert the USB into your vehicle's port and follow the on-screen instructions to complete the update process.
The recommended tire pressure is typically listed on a sticker inside the driver's door frame. For a 2017 E-Class Wagon, it is usually around 32 PSI for the front tires and 35 PSI for the rear tires, but verify in your owner's manual.
To replace the windshield wipers, lift the wiper arm away from the windshield, press the release tab on the wiper blade, slide the old blade off, and attach the new blade by sliding it onto the arm until it clicks into place.
If the check engine light comes on, ensure your gas cap is tightened properly. If the light remains on, use an OBD-II scanner to check for diagnostic trouble codes, or take your vehicle to a certified Mercedes-Benz service center.