Mercedes-Benz E-Class Sedan 2019 Instructions Manual
![Mercedes-Benz E-Class Sedan 2019 manual cover](/images/0cf23a8684adfac15d53e41a/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to position one. Navigate to the trip screen using the left buttons on the steering wheel. Press and hold the phone and OK buttons until the vehicle data is displayed. Select 'Assist Plus,' then 'Full Service,' and confirm the reset.
Mercedes-Benz recommends using synthetic oil with a viscosity rating of 0W-40 or 5W-40 that meets the MB 229.5 specification for the 2019 E-Class Sedan.
To pair your smartphone, enable Bluetooth on your phone. On the vehicle's multimedia screen, select 'Phone', then 'Connect Device'. Choose your phone from the list and confirm the pairing code on both devices.
Locate the spare tire, jack, and lug wrench in the trunk. Position the jack under the vehicle's jacking point and raise the car. Loosen the lug nuts, remove the flat tire, and replace it with the spare. Tighten the lug nuts securely before lowering the vehicle.
Visit the Mercedes-Benz Navigation Update website and download the latest maps to a USB drive. Insert the USB into the vehicle's USB port. Follow on-screen instructions to complete the update process.
Check the battery in the key fob. If it's low, replace it with a new one. If the issue persists, ensure there are no electronic devices causing interference and consult a Mercedes-Benz dealer if needed.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use cruise control on highways, and avoid excessive idling. Also, remove unnecessary weight from the vehicle.
The recommended tire pressure is typically found on a sticker inside the driver's door. Generally, it is around 32 PSI for the front and 35 PSI for the rear tires, but checking the specific vehicle guide is advised.
The engine air filter should be inspected every 15,000 miles and replaced every 30,000 miles or as indicated by your vehicle's maintenance schedule.
Park the vehicle on a level surface facing a wall 25 feet away. Open the hood and locate the headlight adjustment screws. Use a screwdriver to adjust the vertical and horizontal alignment of the headlights until they are properly centered and aligned.