Mercedes-Benz E-Class Coupe 2017 Operator's Manual

To reset the service light, turn on the ignition without starting the engine, use the left menu button on the steering wheel to navigate to the 'Trip' menu, hold down the phone button and 'OK' button simultaneously, then navigate to 'Assyst Plus' and follow the prompts to reset.
The recommended tire pressure for the E-Class Coupe is typically 36 PSI for the front tires and 39 PSI for the rear tires. Always check the owner's manual or the label inside the driver's door for the exact values.
To pair your phone, enable Bluetooth on your phone, access the 'Telephone' menu on your vehicle's infotainment system, select 'Connect Device', and follow the onscreen instructions to complete the pairing process.
Mercedes-Benz recommends using synthetic engine oil that meets the MB 229.5 or MB 229.51 specification for the 2017 E-Class Coupe. Always consult your owner's manual for the correct oil type.
To adjust the seat memory settings, position the seat, steering wheel, and mirrors to your preference, then press the 'M' button followed by one of the numbered buttons to save the settings.
To replace the windshield wiper blades, lift the wiper arms away from the windshield, press the release tab on the wiper blade, slide the blade off the arm, and attach the new blade by reversing the process.
To update the navigation system, you can visit the Mercedes-Benz website to purchase an updated map DVD or download updates onto a USB stick, then follow the instructions provided to install them in your vehicle.
To jump-start the vehicle, connect the positive cable to the positive terminal on your battery, then to the donor vehicle's positive terminal. Connect the negative cable to the donor vehicle's negative terminal and then to a ground point on your vehicle. Start the donor vehicle, then your vehicle.
The parking brake is engaged by pulling the electronic parking brake switch located near the gear selector. The brake will automatically disengage when you start driving.
If the keyless entry system is not working, check the battery in the key fob, replace it if necessary, and ensure there are no other electronic devices interfering with the signal. If the issue persists, consult your dealer for further assistance.