Mercedes-Benz E-Calss 2016 Operator's Manual
![Mercedes-Benz E-Calss 2016 manual cover](/images/8f39eb088b13544b9d4bd205/thumbs/thumb175x175.webp)
To reset the service light on your 2016 E-Class, turn the ignition to position 1 (do not start the engine), navigate to the trip counter using the steering wheel controls, press the call button and OK button simultaneously, select the "Assist Plus" menu, and confirm the reset option.
For the 2016 Mercedes-Benz E-Class, it is recommended to use engine oil that meets the MB 229.5 specification, typically a high-quality 5W-30 or 5W-40 synthetic oil. Always refer to the owner's manual for confirmation.
To pair your phone, enable Bluetooth on your device, select "Telephone" on the COMAND system, choose "Connect Device," and follow the prompts to complete the pairing process. Ensure your phone is discoverable during this process.
The recommended tire pressure for the 2016 E-Class can vary based on the model and load. Generally, it is around 32 PSI for the front tires and 35 PSI for the rear tires. Always refer to the sticker inside the driver’s door for exact specifications.
To replace the key fob battery, remove the mechanical key, open the back cover of the fob using the slot where the mechanical key was, and replace the battery with a new CR2032 coin cell battery.
To update the navigation system, you will need to purchase an update DVD or USB from a Mercedes-Benz dealership or authorized provider and follow the instructions provided to install it via the COMAND system.
A "Check Engine" light can indicate various issues, such as a loose gas cap, faulty oxygen sensor, or catalytic converter problems. It's best to have the vehicle diagnosed with an OBD-II scanner to identify the specific issue.
To change the air filter, open the hood, locate the air filter housing, unclip and remove the cover, replace the old filter with a new one, ensuring it is seated correctly, and reattach the housing cover.
Squeaking noises during braking could be due to worn brake pads, glazed rotors, or debris caught in the brake components. It is advisable to have the brakes inspected and serviced by a professional.
To perform a hard reset on the COMAND system, press and hold the power button for about 10 seconds until the screen turns off and restarts. This can resolve minor software glitches.