Mercedes-Benz AMG GT 2020 Operator's Manual
![Mercedes-Benz AMG GT 2020 manual cover](/images/072644ce284230087a4e8825/thumbs/thumb175x175.webp)
The recommended tire pressure for the 2020 Mercedes-Benz AMG GT is 33 psi for the front tires and 39 psi for the rear tires. Always refer to the placard on the driver's door jamb for the most accurate information.
It is recommended to change the oil every 10,000 miles or once a year, whichever comes first. However, driving conditions and habits can necessitate more frequent changes. Always consult your owner's manual for specific guidelines.
The 2020 Mercedes-Benz AMG GT requires synthetic oil meeting the MB 229.5 specification. Commonly used grades include 0W-40 or 5W-40. It's important to verify with the owner's manual or a certified dealer.
To reset the service indicator, turn the ignition to position 1, use the steering wheel controls to navigate to the "Service" menu, and follow the prompts to reset the service indicator. Refer to the owner's manual for detailed steps.
To pair a smartphone, enable Bluetooth on your phone, go to the COMAND system on the vehicle, select 'Telephone', then 'Connect Device'. Follow the on-screen instructions to complete the pairing process.
To replace the key fob battery, remove the mechanical key, open the key fob using a small flat tool, and replace the old battery with a new CR2032 battery. Ensure the battery is installed with the correct polarity.
If the check engine light illuminates, check for any noticeable issues with the vehicle. If no issues are apparent, schedule a diagnostic check with a certified Mercedes-Benz service center to determine the cause.
If the battery is dead, use the mechanical key to unlock the driver's door, then manually release the trunk from inside the vehicle if necessary. Consult the owner's manual for precise instructions.
The 2020 Mercedes-Benz AMG GT is not designed for towing. It is a high-performance sports car, and towing is not recommended. Consult the vehicle manual for more details.
To replace a headlight bulb, access the headlight housing from the engine compartment, remove the old bulb by twisting it counterclockwise, and install the new bulb by twisting it clockwise. Ensure the bulb is secure before closing the housing.