Maserati Quattroporte 2018 Quick Reference Guide
![Maserati Quattroporte 2018 Sedan manual cover](/images/XoKUTCQwugUpGJxSCKLhWEiI/thumbs/thumb175x175.webp)
The recommended tire pressure for a 2018 Maserati Quattroporte is 33 PSI for the front tires and 36 PSI for the rear tires. Always refer to the owner's manual for the most accurate information.
It is recommended to change the engine oil every 12,000 miles or 12 months, whichever comes first, for the 2018 Maserati Quattroporte. Always check the owner's manual for specific guidance.
For optimal performance, use SAE 5W-40 synthetic oil in the 2018 Maserati Quattroporte. Make sure the oil meets the API SN specification or higher.
To reset the service light, turn the ignition to the "On" position without starting the engine. Press and hold the gas pedal for about 10 seconds, then release it. Turn off the ignition and then start the car to check if the light has reset.
If your Maserati Quattroporte won't start, check the battery connections and ensure they are clean and tight. If the battery is low or dead, try jump-starting the vehicle. If the problem persists, it may require professional diagnostic to check for issues in the starter, ignition switch, or fuel system.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, keeping tires properly inflated, and using high-quality fuel. Avoid aggressive driving and excess idling, and remove unnecessary weight from the vehicle.
A squeaking noise when braking can be caused by worn brake pads or rotors. Inspect the brake components and replace as necessary. Brake dust or debris may also cause noise, so cleaning the brake system might resolve the issue.
The 2018 Maserati Quattroporte is not designed for towing and does not have an official towing capacity. It is best to avoid using it for towing purposes to prevent damage to the vehicle.
To connect your phone, enable Bluetooth on your device and access the vehicle's infotainment system. Select 'Phone' on the screen, then 'Add Device'. Choose your phone from the list of available devices and confirm the pairing code when prompted.
If the check engine light illuminates, first ensure the gas cap is tightened. If the light remains on, have the vehicle scanned for diagnostic trouble codes (DTCs) at a professional service center to identify the underlying issue.