Maserati Levante 2020 Owner's Manual
![Maserati Levante 2020 SUV manual cover](/images/DeQtclBtVtingvwtJgzekOAm/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, inflate all tires to the recommended pressures. Drive the vehicle at a speed above 20 mph for more than 10 minutes. The system will automatically reset and the warning light should turn off.
The Maserati Levante 2020 typically requires SAE 0W-40 synthetic oil meeting ACEA C3 specifications. Always refer to the owner’s manual for the most accurate information.
To connect your smartphone, enable Bluetooth on your device. On the infotainment screen, go to the Bluetooth menu, and select 'Pair New Device'. Follow the on-screen prompts to complete the pairing process.
To replace the cabin air filter, locate the filter housing under the glove compartment. Remove the cover and slide out the old filter. Insert the new filter, ensuring the airflow arrows are pointing in the correct direction, and replace the cover.
To perform a hard reset, press and hold the power button on the infotainment system for about 10 seconds until the screen turns off and restarts.
The recommended maintenance schedule includes an oil change every 12,000 miles or 12 months, brake fluid replacement every 24 months, and regular inspections of the brake system, tires, and suspension components. Always refer to the owner's manual for specific intervals.
To enable cruise control, press the 'Cruise Control' button on the steering wheel. Use the 'Set' button to set your desired speed. Adjust the speed using the '+' and '-' buttons.
To check the engine coolant level, ensure the engine is cool. Open the hood and locate the coolant reservoir. The coolant level should be between the 'MIN' and 'MAX' marks on the reservoir.
If the Levante does not start, check the battery connections for corrosion, ensure the battery is charged, and verify that the key fob battery is functional. Also, check the fuel level and inspect fuses related to the ignition system.
Rear parking sensors activate automatically when the vehicle is placed in reverse gear. Ensure that the sensors are not obstructed by dirt or debris for optimal performance.