Maserati GranTurismo MC 2018 Owner's Manual
![Maserati GranTurismo MC 2018 Grand Tourer manual cover](/images/adJiROHIkZhLDVENimpkaMeT/thumbs/thumb175x175.webp)
The recommended tire pressure for the Maserati GranTurismo MC 2018 is 32 psi for both the front and rear tires. Always check the owner's manual or the door placard for the most accurate information.
It is recommended to change the oil every 10,000 miles or 12 months, whichever comes first. However, more frequent changes may be necessary depending on driving conditions and style.
The Maserati GranTurismo MC 2018 typically uses SAE 5W-40 full synthetic motor oil. Always refer to the owner’s manual for the specific oil requirements.
To reset the service light, turn the ignition to the "On" position without starting the engine. Press and hold the odometer reset button until the service light begins to flash and then turns off. Release the button.
Common causes of battery drain include leaving lights on, electronic accessories drawing power while the car is off, or a faulty alternator. Regular checks and maintenance can help prevent battery issues.
To pair your phone, activate Bluetooth on your phone and on the car's multimedia system. Search for devices on your phone and select the Maserati system. Confirm the pairing code on both devices to complete the connection.
The recommended maintenance schedule includes regular oil changes every 10,000 miles, brake inspections, tire rotations, and fluid checks every 12 months. Refer to the owner's manual for a detailed schedule.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid excessive idling, and drive at steady speeds. Reducing unnecessary weight can also help.
If the engine overheats, safely pull over and turn off the car. Allow the engine to cool before checking coolant levels. Do not open the radiator cap while hot. If necessary, add coolant and seek professional assistance.
To replace a headlight bulb, first disconnect the battery. Access the headlamp assembly from under the hood, remove the protective cover, and carefully disconnect and replace the bulb. Reassemble and test the new bulb.