Magic Chef MCBR170BMD Instruction Manual
![Magic Chef MCBR170BMD Refrigerator manual cover](/images/AQQRUsEdCnqhJIaUBJInwtcI/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator. Turn the dial clockwise to lower the temperature and counterclockwise to raise it. It's recommended to allow 24 hours for the temperature to stabilize after making adjustments.
Ensure the refrigerator is plugged in and the thermostat is set correctly. Check for adequate ventilation around the appliance, and clean the condenser coils if they are dusty. Also, ensure the door seals are intact and not obstructed.
Defrosting is typically necessary when the frost build-up is about a quarter-inch thick. However, the need may vary based on the humidity and usage patterns. Always ensure the refrigerator is unplugged before defrosting.
Remove all food items and shelves. Use a mixture of mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry thoroughly before replacing the shelves and food items.
Unusual noises can result from the refrigerator being placed on an uneven surface. Ensure it is level. Additionally, check for any loose items inside the refrigerator that may be vibrating. If the noise persists, consider contacting customer service.
Ensure the door seals are clean and tight. Avoid placing hot food inside the refrigerator, and keep it away from heat sources. Make sure the condenser coils are clean and there is adequate space for airflow around the unit.
When transporting, keep the refrigerator upright to prevent compressor oil from leaking. Secure the door and any removable parts. It's recommended to allow the refrigerator to sit upright for several hours before plugging it in after transport.
Regularly clean spills and remove expired items. Use activated charcoal or baking soda to absorb odors. Ensure food is covered or sealed to prevent odors from spreading.
Inspect the door seal for any debris or misalignment. If damaged, it may need replacement. Contact the manufacturer or a professional technician for a suitable replacement part and installation.
After installation or moving the refrigerator, it is advisable to wait approximately 4 hours before plugging it in. This allows the refrigerant to settle properly.