Lincoln MKZ Hybrid 2013 Quick Reference Guide

To reset the oil change reminder, turn the ignition on without starting the engine. Access the vehicle settings on the dashboard display, then navigate to 'Oil Life Reset' and hold the OK button until it resets to 100%.
The recommended coolant for the 2013 Lincoln MKZ Hybrid is a Motorcraft Orange Antifreeze/Coolant, which is an ethylene glycol-based antifreeze. Ensure it meets the Ford specification WSS-M97B44-D.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, keep your tires properly inflated, minimize idling, use cruise control on highways, and avoid carrying unnecessary weight in the vehicle.
A clicking noise when turning may indicate a worn CV joint. It is recommended to have the CV joints and boots inspected for damage or wear, and replace them if necessary.
To pair your phone with the SYNC system, turn on Bluetooth on your phone, press the 'Phone' button on the SYNC system, and select 'Add a Device'. Follow the prompts on the screen and your phone to complete the pairing process.
The recommended tire pressures for the 2013 Lincoln MKZ Hybrid are 35 psi for both front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
If the battery is not holding a charge, check the battery terminals for corrosion, ensure the alternator is functioning properly, and test the battery's health. If issues persist, the battery may need to be replaced.
The air filter should generally be replaced every 15,000 to 30,000 miles, but check the owner's manual for specific recommendations and consider more frequent changes if you drive in dusty conditions.
If the check engine light comes on, first check for any loose gas caps, as this is a common cause. If the light remains on, have the vehicle scanned for diagnostic trouble codes (DTCs) to determine the underlying issue.
To change the cabin air filter, open the glove box and remove the limiting stop arm. Squeeze the sides of the glove box to release it and access the cabin air filter cover. Remove the cover, take out the old filter, and insert the new one before reassembling.