Lincoln MKZ Hybrid 2018 Quick Reference Guide
![Lincoln MKZ Hybrid 2018 Sedan manual cover](/images/AzZKsKrfkIDanUAbfrkquroY/thumbs/thumb175x175.webp)
To reset the oil change reminder, turn the ignition to the "on" position without starting the engine. Use the steering wheel controls to navigate to the settings menu, find the "Vehicle" section, and select "Oil Life Reset." Confirm the reset to complete the process.
The 2018 Lincoln MKZ Hybrid is designed to run on regular unleaded gasoline with an octane rating of 87 or higher.
To improve fuel efficiency, ensure your tires are properly inflated, drive at moderate speeds, avoid rapid acceleration, and keep up with regular maintenance such as oil changes and air filter replacements.
To jump-start your MKZ Hybrid, connect the positive cable to the positive terminal of the dead battery and then to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery and then to a metal ground on your vehicle. Start the booster vehicle, then your MKZ.
The air filter should be checked every 15,000 miles and replaced every 30,000 miles, or more frequently if you drive in dusty conditions.
Yes, you can manually open the trunk by using the key blade hidden inside the remote key fob. Insert the key into the lock cylinder located on the trunk lid and turn it to unlock the trunk.
The recommended tire pressure for the 2018 Lincoln MKZ Hybrid is 33 psi for both the front and rear tires. Always check the tire pressure when the tires are cold.
To connect your smartphone, ensure Bluetooth is enabled on your phone. On the SYNC 3 screen, press "Phone," then "Add Phone." Follow the prompts to pair your device, and confirm the pairing code matches on both devices.
If the check engine light comes on, check for any noticeable issues such as unusual noises or performance changes. Ensure the gas cap is tightly sealed. If the light remains, have the vehicle inspected by a qualified technician as soon as possible.
To replace a headlight bulb, turn off the vehicle and open the hood. Locate the headlight assembly and remove the cover behind the bulb. Disconnect the electrical connector and remove the old bulb. Insert the new bulb, reconnect the connector, and secure the cover.