Lincoln MKC 2016 Quick Reference Guide
![Lincoln MKC 2016 Crossover manual cover](/images/lZOPaPbjaUrFseEOjsnXVbOy/thumbs/thumb175x175.webp)
To pair your smartphone with the SYNC system, turn on your phone's Bluetooth. On the SYNC screen, go to 'Settings', select 'Bluetooth', and then 'Add a Device'. Follow the on-screen prompts and confirm the PIN on both devices.
For the Lincoln MKC 2016, it is recommended to use SAE 5W-30 engine oil that meets the Ford specification WSS-M2C946-A.
To reset the oil change indicator, turn the ignition to 'On' without starting the engine. Press the brake and gas pedals simultaneously and hold until a message confirms the reset.
The check engine light can illuminate for various reasons, including a loose gas cap, faulty oxygen sensor, or engine misfire. It is best to use an OBD-II scanner to diagnose the specific issue.
To replace the cabin air filter, locate the filter housing behind the glove box. Remove the glove box by pressing its sides, unclip the filter cover, and replace the old filter with a new one.
The Lincoln MKC 2016 has a towing capacity of up to 3,000 pounds when properly equipped with the Class II Trailer Tow Package.
To update the navigation system, visit the Lincoln Owner website to check for updates. You may need a USB drive to download the update and then install it via the vehicle's USB port.
The recommended tire pressure for the Lincoln MKC 2016 is typically 35 PSI for both front and rear tires. However, always check the sticker inside the driver's door for exact specifications.
To perform a system check, use the information display controls on the steering wheel. Navigate to 'Settings', then to 'Vehicle', and select 'System Check'. The vehicle will display various system statuses.
If the climate control system is not working, check the fuses related to the HVAC system, ensure the air filters are clean, and verify the system settings are correct. If issues persist, consult a professional technician.