Lincoln MKX 2014 Quick Reference Guide

To reset the oil change light, turn the ignition to the "on" position without starting the engine. Use the controls on the steering wheel to navigate to "Settings" on the instrument cluster screen, select "Vehicle," then "Oil Life Reset," and finally choose "Reset" to confirm.
The recommended tire pressure for the 2014 Lincoln MKX is typically 35 PSI for both front and rear tires. Always check the sticker on the driver's side door jamb for the most accurate specifications.
To pair your smartphone, ensure Bluetooth is enabled on your phone. Press the 'Phone' button on the MKX's console, select 'Add Device,' and follow the prompts to connect. Enter the code displayed on the screen into your phone if required.
The 2014 Lincoln MKX typically requires 5W-20 synthetic blend motor oil for optimal performance. Always refer to the owner's manual for specific recommendations.
To replace the cabin air filter, open the glove box and remove any contents. Release the glove box by pressing the sides inward, then locate the filter cover behind it. Remove the cover and replace the old filter with a new one, ensuring correct orientation.
If the check engine light comes on, first ensure the gas cap is tightly closed. If the light remains, use an OBD-II scanner to retrieve the error codes or visit a professional mechanic for a diagnostic check.
To jump-start the vehicle, connect the positive cable to the positive battery terminal of the MKX and the donor vehicle. Connect the negative cable to the negative terminal of the donor battery and a metal ground on the MKX. Start the donor vehicle, then the MKX.
To update the SYNC software, download the latest update from the Lincoln website onto a USB drive. Insert the USB into the vehicle's USB port and follow the on-screen instructions to complete the update.
The 2014 Lincoln MKX has a towing capacity of up to 3,500 pounds when properly equipped with a Class II Trailer Tow Package. Always consult your owner’s manual for specific towing guidelines.
To replace the key fob battery, press the release button and pull out the key. Use a small screwdriver to pry open the fob, remove the old battery, and insert a new CR2032 battery. Reassemble the fob and ensure it clicks into place.