Lexus RX L 2020 Navigation Manual
![Lexus RX L 2020 SUV manual cover](/images/YtRGPmnEaWvNkDBlNrSGBfXn/thumbs/thumb175x175.webp)
To pair your smartphone, go to the Setup menu on the infotainment screen, select Bluetooth, and then 'Add Device'. Ensure Bluetooth is enabled on your phone and select 'Lexus RX' from the list. Enter the passcode displayed on the screen if prompted.
The recommended tire pressure for the Lexus RX L 2020 is typically 33 psi for both front and rear tires. Always check the specifications in the owner’s manual or the label inside the driver’s door for confirmation.
Turn the ignition to the 'ON' position without starting the engine. Use the steering wheel controls to navigate to the Settings menu, select 'Vehicle', then 'Maintenance'. Follow the prompts to reset the service interval.
A squealing noise during braking is often due to worn brake pads. It is advisable to have the brakes inspected and replaced if necessary. Dust or debris caught between the brake pads and rotor can also cause this noise.
To use adaptive cruise control, first activate the cruise control system by pressing the button on the steering wheel. Set your desired speed, and the system will automatically adjust your car’s speed to maintain a safe distance from the vehicle ahead.
The recommended oil for the Lexus RX L 2020 is SAE 0W-20 full synthetic oil. Refer to the owner’s manual for further details and any specific recommendations for your driving conditions.
To update the navigation system, visit the Lexus website to check for the latest map update. You can either download the update to a USB drive or visit a Lexus dealership to have them perform the update for you.
If the key fob battery is low, replace it with a CR2032 battery. Use a small flathead screwdriver to open the fob, remove the old battery, and insert the new one. Ensure the battery is placed with the positive side facing up.
To enable lane departure alert, press the lane departure button located on the steering wheel. Ensure the system is activated through the vehicle settings on the infotainment screen. Adjust sensitivity and alert settings as desired.
If the engine overheats, pull over safely, turn off the engine, and allow it to cool. Check coolant levels and look for leaks. Do not attempt to open the radiator cap while the engine is hot. Seek professional assistance if necessary.