Lexus GS F 2018 Navigation Manual
![Lexus GS F 2018 Sedan manual cover](/images/EySnypXfPpNSWMqyrbczSJqH/thumbs/thumb175x175.webp)
The recommended oil type for the 2018 Lexus GS F is SAE 0W-20 full synthetic oil for optimal performance and fuel efficiency.
To reset the maintenance light, turn the ignition to the "ON" position, press the "Odometer" button until you see "Trip A," turn the ignition off, hold the "Odometer" button, and turn the ignition back to "ON" until the maintenance light resets.
The recommended tire pressure for the 2018 Lexus GS F is 35 psi for both front and rear tires.
To pair your phone, enable Bluetooth on your phone, navigate to "Setup" on the Lexus infotainment system, select "Bluetooth," then "Add Device," and follow the prompts to complete pairing.
If the navigation system is unresponsive, try restarting the system by turning the vehicle off and on again. If the issue persists, check for any available software updates or consult a Lexus dealer.
It is recommended to inspect the air filter every 15,000 miles and replace it every 30,000 miles, or more frequently if you drive in dusty conditions.
The 2018 Lexus GS F is not designed for towing, and it is recommended not to use it for towing purposes to prevent damage to the vehicle.
To activate the cruise control, press the "ON/OFF" button on the steering wheel, accelerate to your desired speed, and then press the "SET" button to maintain the speed. Adjust speed using the "+" or "-" buttons as needed.
The recommended fuel for the 2018 Lexus GS F is premium unleaded gasoline with an octane rating of 91 or higher for optimal engine performance.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid excessive idling, and use smooth acceleration and braking.