Lexus RX 2022 Navigation Manual

To connect your smartphone to the Lexus RX 2022 via Bluetooth, first enable Bluetooth on your smartphone. Then, on the vehicle's multimedia display, go to Setup > Bluetooth > Add Device. Select your device from the list of available devices and confirm the pairing code on both your phone and the vehicle's screen.
The recommended tire pressure for the Lexus RX 2022 is typically 35 psi for both the front and rear tires. However, always check the sticker on the driver's side door jamb for the most accurate information specific to your vehicle.
To reset the maintenance required light on your Lexus RX 2022, turn the ignition on without starting the engine. Press the ODO/TRIP button until the odometer displays ODO. Turn the ignition off. Press and hold the ODO/TRIP button and turn the ignition back on. Hold the button until the odometer resets and the maintenance light turns off.
The Lexus RX 2022 typically requires SAE 0W-20 full synthetic oil. However, always refer to the owner's manual for confirmation and consult with a Lexus service center if you're unsure.
To use adaptive cruise control in the Lexus RX 2022, press the cruise control button on the steering wheel. Accelerate to your desired speed and press the set button. Adjust the distance setting using the distance button on the steering wheel to maintain a safe following distance.
To replace a flat tire on the Lexus RX 2022, first ensure the vehicle is on a flat, stable surface and the parking brake is engaged. Use the lug wrench to slightly loosen the lug nuts, then use the jack to lift the vehicle. Remove the lug nuts and the flat tire, replace it with the spare, and hand-tighten the lug nuts. Lower the vehicle and fully tighten the lug nuts in a crisscross pattern.
To update the navigation system in your Lexus RX 2022, you may need to purchase the latest map update from a Lexus dealer or the official Lexus website. Follow the instructions provided with the update to install it via USB or SD card, depending on the system.
The check engine light in your Lexus RX 2022 could be on for various reasons, such as a loose gas cap, faulty oxygen sensor, or an issue with the catalytic converter. It's best to have the vehicle checked by a professional technician who can diagnose the specific cause using an OBD-II scanner.
To adjust the head-up display in the Lexus RX 2022, use the HUD controls located on the dashboard to the left of the steering wheel. You can adjust the brightness, position, and content displayed using these controls. Refer to the owner's manual for detailed instructions.
If your Lexus RX 2022 won't start, first check the battery connections to ensure they are clean and tight. If the battery is in good condition, verify that the vehicle is in Park or Neutral and that the brake pedal is fully depressed while starting. If the problem persists, it may require professional diagnosis by a Lexus technician.