Lexus RX 2016 Navigation Manual

To pair your smartphone, go to the 'Setup' menu on the vehicle's display screen, select 'Bluetooth', then 'Add Device'. Make sure Bluetooth is enabled on your phone, and select 'Lexus RX' from the list of available devices. Confirm the passkey if prompted.
The recommended oil type for the Lexus RX 2016 is SAE 0W-20 full synthetic motor oil. It is important to follow this specification for optimal engine performance and efficiency.
To reset the maintenance light, turn the vehicle to the 'On' position without starting the engine. Press the 'Odometer' button until the display reads 'Trip A'. Turn the vehicle off, press and hold the 'Odometer' button, then turn the vehicle back to the 'On' position. Hold until the light resets.
If your key fob battery is low, you can replace it by using a small flathead screwdriver to gently pry open the fob. Replace the old battery with a new CR1632 lithium battery, ensuring the positive side faces up, and snap the fob back together.
To use adaptive cruise control, press the 'ON/OFF' button on the steering wheel. Accelerate to your desired speed, then press the 'SET' button. Use the 'Distance' button to adjust the following distance. The system will automatically maintain the set speed and distance from the vehicle in front.
The spare tire in the Lexus RX 2016 is located under the cargo area floor. Lift the floor panel by pulling the tab at the rear of the cargo area. The spare tire and necessary tools are stored in a compartment underneath.
The towing capacity of the Lexus RX 2016 is 3,500 pounds when properly equipped with the towing package, which includes a heavy-duty radiator and transmission cooler.
To update the navigation system, purchase the latest map update from an authorized Lexus dealer or the official Lexus website. Follow the included instructions to install the update using a USB drive. Ensure the vehicle is in 'Park' and the engine is running during the update process.
A squealing noise when braking could indicate that the brake pads are worn and need replacement. It is recommended to have the brakes inspected by a qualified technician to determine if the pads or rotors need servicing.
If the power liftgate fails, you can manually open it by pulling the lever from inside the cargo area. Remove the access panel on the inside of the liftgate to find the manual release lever, then pull it to unlock the liftgate.