Lexus GS 2014 Navigation Manual

To reset the maintenance light on a 2014 Lexus GS, turn the ignition to the "ON" position without starting the engine. Press the "ODO/TRIP" button to display the odometer reading. Turn the ignition off, press and hold the "ODO/TRIP" button, and turn the ignition back to "ON". Continue holding the button until the maintenance light turns off.
The recommended engine oil for a 2014 Lexus GS is SAE 0W-20. It is essential to use oil that meets the Lexus specifications and change it at regular intervals as per the maintenance schedule.
To pair your phone with the Bluetooth system in a 2014 Lexus GS, first ensure that Bluetooth is enabled on your phone. On the vehicle's display, go to the "Setup" menu, select "Bluetooth", then "Add Device". Follow the prompts and select your car from the Bluetooth menu on your phone. Enter the passkey if required.
The recommended tire pressure for a 2014 Lexus GS is typically 35 PSI for both the front and rear tires. However, always refer to the sticker located on the driver's side door jamb for the most accurate information.
To replace the cabin air filter in a 2014 Lexus GS, open the glove box and remove any contents. Detach the damper from the glove box and lower it. Remove the filter cover by pressing the tabs on each side, then slide out the old filter and replace it with a new one, ensuring the airflow arrows point in the correct direction. Reassemble everything in reverse order.
If a power window in your 2014 Lexus GS is not functioning, check the window lock switch to ensure it is not engaged. Verify the fuse associated with the power windows is not blown. If the fuse is intact, consider testing the window switch and motor for potential issues or consult a professional technician.
A squealing noise when braking in a 2014 Lexus GS is often due to worn brake pads. The noise can also be caused by brake dust or debris caught between the pads and rotors. Inspect the brake pads for wear, and replace them if necessary. If the pads are in good condition, cleaning the brake components might solve the issue.
To use the cruise control on a 2014 Lexus GS, ensure the vehicle is traveling at your desired speed above 25 mph. Press the "ON/OFF" button on the cruise control lever to turn it on, then push the lever down to set the speed. Adjust the speed using the lever's up and down positions. To cancel, pull the lever towards you or press the brake pedal.
If the check engine light comes on in your 2014 Lexus GS, check for any noticeable issues such as loose gas caps. If none are found, it is advisable to use an OBD-II scanner to retrieve the error code. Based on the code, determine if immediate service is needed or consult a certified Lexus technician for a comprehensive diagnosis.
Programming a new key fob for a 2014 Lexus GS typically requires a visit to a Lexus dealer or a professional locksmith, as specialized equipment is needed. Contact your dealer or locksmith to ensure they can program the fob to your vehicle's immobilizer system.