KTM SX‑F 350 EU 2011 Owner's Manual
![KTM SX‑F 350 EU 2011 Motorcycle manual cover](/images/RFoJDGRGvNqxVaLkdbqLjcfw/thumbs/thumb175x175.webp)
The recommended engine oil for the KTM SX-F 350 EU 2011 is a high-quality synthetic 4-stroke engine oil with a viscosity of 10W-50. Always use oils that meet or exceed JASO MA2 specifications.
The engine oil should be changed every 10 hours of riding or after every race, whichever comes first. Regular oil changes ensure optimal engine performance and longevity.
For off-road use, the recommended tire pressures are typically 12 psi for the front tire and 12 psi for the rear tire. Adjust the pressure based on terrain and rider preference.
To adjust the suspension, refer to the owner's manual for baseline settings. Increase the compression damping for firmer suspension and decrease it for a softer ride. Adjust rebound damping to control the speed of suspension return.
Check the battery for charge and connections, inspect the fuel supply, ensure the kill switch is in the run position, and check the spark plug for fouling. If the issue persists, consult a professional mechanic.
Remove the air filter, wash it with a non-flammable solvent, allow it to dry, and apply air filter oil to ensure proper filtration. Reinstall carefully to avoid air leaks.
To adjust chain tension, place the bike on a stand, loosen the rear axle nut, adjust the chain adjusters evenly on both sides, and tighten the axle nut to the specified torque. Ensure the chain has about 1.5 inches of slack.
Ensure the brake pads and discs are in good condition, bleed the brake system to remove air, and use high-quality brake fluid. Consider upgrading to performance pads for better stopping power.
Regularly check coolant levels, inspect hoses for leaks or wear, and ensure the radiator is free from obstructions. Replace the coolant every two years or as specified in the manual.
To adjust the throttle cable, loosen the locknut at the throttle grip, adjust the cable adjuster to ensure proper free play (typically 2-3 mm), and retighten the locknut. Ensure smooth throttle operation after adjustment.