Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, technical accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Engine number
- 5.4 Fork part number
- 5.5 Shock absorber article number
- 5.6 Steering damper article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Handbrake lever
- 6.3 Throttle grip
- 6.4 Combination switch, left side
- 6.5 Light switch
- 6.6 Cruise control buttons
- 6.7 Adaptive cruise control buttons (ACC)
- 6.8 +RES/-SET button
- 6.9 Menu switches
- 6.10 Turn signal switch
- 6.11 Horn button
- 6.12 Combination switch, right
- 6.13 Hazard warning flasher switch
- 6.14 C1 and C2 switch
- 6.15 RACE ON button
- 6.16 Start button/emergency OFF switch
- 6.17 Steering lock (antenna)
- 6.18 Immobilizer
- 6.19 RACE ON key
- 6.20 Anti-relay attack (ARA)
- 6.21 Socket for electrical accessories
- 6.22 USB socket
- 6.23 Opening fuel tank filler cap
- 6.24 Closing the fuel tank filler cap
- 6.25 Fuel petcocks
- 6.26 Opening storage compartment
- 6.27 Closing storage compartment
- 6.28 Passenger seat unlocking
- 6.29 Passenger seat emergency release
- 6.30 Grab handles
- 6.31 Luggage rack plate
- 6.32 Passenger foot pegs
- 6.33 Shift lever
- 6.34 Foot brake lever
- 6.35 Side stand
- 6.36 Center stand
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument
- 7.2 Activation and test
- 7.3 Day-night mode
- 7.4 Warnings
- 7.5 Ice warning
- 7.6 Warning for rider to take over control
- 7.7 Indicator lamps
- 7.8 Display
- 7.9 Display Rally (optional)
- 7.10 Engine speed
- 7.11 Shift light
- 7.12 Cruise control indicator
- 7.13 Adaptive cruise control indicator
- 7.14 Speed
- 7.15 ABS display
- 7.16 MTC display
- 7.17 RideMode display
- 7.18 Coolant temperature indicator
- 7.19 Suspension Mode display
- 7.20 Preload Adjuster display
- 7.21 Heated grip (optional)
- 7.22 Seat heating (optional)
- 7.23 Fuel level display
- 7.24 Favourites display
- 7.25 Navigation display (optional)
- 7.26 Call display
- 7.27 Menu
  - 7.27.1 KTM MY RIDE
  - 7.27.2 Phone
  - 7.27.3 Rider's Headset
  - 7.27.4 Headset Type
  - 7.27.5 Navigation (optional)
  - 7.27.6 Skip Waypoint (optional)
  - 7.27.7 Volume (optional)
  - 7.27.8 Audio
  - 7.27.9 Audio
  - 7.27.10 Call out
  - 7.27.11 Bike Info
  - 7.27.12 Bike Info
  - 7.27.13 Trip
  - 7.27.14 Trip 1
  - 7.27.15 Trip 2
  - 7.27.16 Suspension
  - 7.27.17 Suspension Mode
  - 7.27.18 Preload Adjuster
  - 7.27.19 Anti Dive (optional)
  - 7.27.20 Fork
  - 7.27.21 Shock
  - 7.27.22 Motorcycle
  - 7.27.23 Ride Mode
  - 7.27.24 MTC
  - 7.27.25 MTC+MSR (optional)
  - 7.27.26 ABS
  - 7.27.27 Throttle Response (optional)
  - 7.27.28 Slip Adjuster (optional)
  - 7.27.29 Cruise Control
  - 7.27.30 Cruise Control Mode
  - 7.27.31 ACC Distance
  - 7.27.32 Settings
  - 7.27.33 Custom Switch
  - 7.27.34 C1 and C2 buttons
  - 7.27.35 Favourites
  - 7.27.36 Favourites indicator 1-4
  - 7.27.37 TPMS Setting
  - 7.27.38 Anti Relay Attack
  - 7.27.39 Display Theme
  - 7.27.40 Button Illumination
  - 7.27.41 DRL
  - 7.27.42 Bluetooth
  - 7.27.43 Quickshifter + (optional)
  - 7.27.44 Hill Hold Control (optional)
  - 7.27.45 Shift Light
  - 7.27.46 Shift Light State
  - 7.27.47 Shift Light RPM1
  - 7.27.48 Shift Light RPM2
  - 7.27.49 Clock & Date
  - 7.27.50 Clock Format
  - 7.27.51 Date Format
  - 7.27.52 Units
  - 7.27.53 Units Distance
  - 7.27.54 Units Temperature
  - 7.27.55 Units Consumption
  - 7.27.56 Units Pressure
  - 7.27.57 Settings Heating
  - 7.27.58 Settings Heating Grips
  - 7.27.59 Settings Heating Rider Seat
  - 7.27.60 Settings Heating Pillion Seat
  - 7.27.61 Extra Functions
  - 7.27.62 Setting the time and date
  - 7.27.63 Heating (function optional)
  - 7.27.64 Heating Grips (function optional)
  - 7.27.65 Heating Rider Seat (function optional)
8 ERGONOMICS
- 8.1 Setting the front rider's seat
- 8.2 Handlebar position
- 8.3 Adjusting the handlebar position
- 8.4 Adjusting the windshield
- 8.5 Adjusting the basic position of the clutch lever
- 8.6 Adjusting the basic position of the hand brake lever
- 8.7 Rider footrests
- 8.8 Adjusting the footrests
- 8.9 Checking the basic position of the shift lever
- 8.10 Adjusting the basic position of the shift lever
- 8.11 Setting the shift lever stub
- 8.12 Adjusting the basic position of the foot brake lever
- 8.13 Adjusting the tilt of the combination instrument
9 PREPARING FOR USE
- 9.1 Advice on preparing for first use
- 9.2 Running in the engine
- 9.3 Loading the vehicle
10 RIDING INSTRUCTIONS
- 10.1 Checks and maintenance measures when preparing for use
- 10.2 Starting
- 10.3 Starting off
- 10.4 Quickshifter + (optional)
- 10.5 Starting with HHC (optional)
- 10.6 Shifting, riding
- 10.7 MSR (optional)
- 10.8 Braking
- 10.9 Stopping, parking
- 10.10 Transporting
- 10.11 Towing in the event of a breakdown
- 10.12 Refueling
11 SERVICE SCHEDULE
- 11.1 Additional information
- 11.2 Service work
12 SUSPENSION SETTING
- 12.1 Fork/shock absorber
- 12.2 Preload adjuster
- 12.3 Suspension Mode
13 SERVICE WORK ON THE CHASSIS
- 13.1 Raising the vehicle with the center stand
- 13.2 Removing the vehicle from the center stand
- 13.3 Removing the passenger seat
- 13.4 Mounting the passenger seat
- 13.5 Removing the front rider's seat
- 13.6 Mounting the front rider's seat
- 13.7 Checking for chain dirt
- 13.8 Cleaning the chain
- 13.9 Checking the chain tension
- 13.10 Adjusting the chain tension
- 13.11 Checking the chain, rear sprocket, and engine sprocket
- 13.12 Checking/correcting the fluid level of the hydraulic clutch
- 13.13 Checking steering head bearing play
- 13.14 Removing the bottom triple clamp cover
- 13.15 Installing the bottom triple clamp cover
- 13.16 Removing the windshield
- 13.17 Installing the windshield
- 13.18 Removing the storage compartment
- 13.19 Installing storage compartment
- 13.20 Removing the top fuel tank fairing
- 13.21 Installing the top fuel tank fairing
- 13.22 Removing the bottom fuel tank fairing
- 13.23 Installing the bottom fuel tank fairing
- 13.24 Removing the front side spoiler
- 13.25 Installing the front side spoiler
- 13.26 Removing the front side cover
- 13.27 Installing the front side cover
- 13.28 Removing the mask spoiler
- 13.29 Installing the mask spoiler
- 13.30 Removing the engine guard
- 13.31 Installing the engine guard
- 13.32 Removing the oil plug cover
- 13.33 Installing the oil plug cover
- 13.34 Removing front fender
- 13.35 Installing front fender
- 13.36 Cleaning the dust boots of the fork legs
14 BRAKE SYSTEM
- 14.1 Anti-lock braking system (ABS)
- 14.2 Checking the brake discs
- 14.3 Checking the front brake fluid level
- 14.4 Adding front brake fluid
- 14.5 Checking that the brake linings of the front brake are secured
- 14.6 Checking the rear brake fluid level
- 14.7 Adding rear brake fluid
- 14.8 Checking that the brake linings of the rear brake are secured
15 WHEELS, TIRES
- 15.1 Removing the front wheel
- 15.2 Installing the front wheel
- 15.3 Removing the rear wheel
- 15.4 Installing the rear wheel
- 15.5 Checking the rear hub damping rubber pieces
- 15.6 Checking the tire condition
- 15.7 Checking tire pressure
- 15.8 Using tire repair spray
16 ELECTRICAL SYSTEM
- 16.1 Adaptive cruise control (ACC)
- 16.2 Low beam
- 16.3 High beam
- 16.4 Daytime running light (DRL)
- 16.5 Cornering light
- 16.6 Removing the 12 V battery
- 16.7 Installing the 12-V battery
- 16.8 Charging the 12-V battery
- 16.9 Changing the RACE-ON key battery
- 16.10 Changing the main fuse
- 16.11 Changing the fuses in the fuse box
- 16.12 Checking the headlight setting
- 16.13 Adjusting the headlight range
- 16.14 Diagnostics connector
- 16.15 Accessories circuit 1 and accessories circuit 2 front
- 16.16 Accessories circuit 1 and accessories circuit 2, rear
17 COOLING SYSTEM
- 17.1 Checking the coolant level in the compensating tank
- 17.2 Correcting the coolant level in the compensating tank
18 TUNING THE ENGINE
- 18.1 Ride Mode
- 18.2 Motorcycle traction control (MTC)
- 18.3 Slip Adjuster (optional)
- 18.4 Throttle Response (optional)
19 SERVICE WORK ON THE ENGINE
- 19.1 Checking the engine oil level
- 19.2 Changing the engine oil and oil filter, cleaning the oil screens
- 19.3 Adding engine oil
20 CLEANING, CARE
- 20.1 Cleaning the motorcycle
- 20.2 Checks and maintenance steps for winter operation
21 STORAGE
- 21.1 Storage
- 21.2 Preparing for use after storage
22 TROUBLESHOOTING
23 TECHNICAL SPECIFICATIONS
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 DECLARATIONS OF CONFORMITY
- 24.1 Declarations of conformity
- 24.2 Country-specific declarations of conformity (KTM RACE ON system 1)
- 24.3 Country-specific declarations of conformity (KTM RACE ON system 2)
- 24.4 Country-specific declarations of conformity (CCU2)
- 24.5 Country-specific declarations of conformity (front radar sensor)
25 OPEN SOURCE
- 25.1 Information on open source software
26 SUBSTANCES
27 AUXILIARY SUBSTANCES
28 STANDARDS
29 INDEX OF SPECIAL TERMS
30 LIST OF ABBREVIATIONS
31 LIST OF SYMBOLS
- 31.1 Red symbols
- 31.2 Yellow and orange symbols
- 31.3 Green and blue symbols
INDEX
- +
- 1
- A
- B
- C
- D
- E
- F
- G
- H
- I
- L
- M
- O
- P
- Q
- R
- S
- T
- U
- V
- W

KTM Adventure 1290 Super S 2023 Owner's Manual

KTM Adventure 1290 Super S 2023 Motorcycle manual cover

Pages 196

Year 2023

Language(s)

of 196

KTM Adventure 1290 Super S 2023 Motorcycle Specification

The KTM Adventure 1290 Super S 2023 is a high-performance adventure motorcycle designed to excel in both on-road and off-road conditions. It is powered by a robust 1301cc V-twin engine that delivers an impressive 160 horsepower and 138 Nm of torque, ensuring powerful acceleration and superior performance across various terrains. The engine is paired with a six-speed transmission featuring a quick shifter for seamless gear changes and enhanced riding dynamics.

This motorcycle boasts a lightweight chromium-molybdenum steel trellis frame that provides excellent stability and maneuverability. It is equipped with WP semi-active suspension, offering 220mm of travel both front and rear, which can be adjusted on-the-fly to suit different riding conditions. The braking system includes dual 320mm front discs with radial-mounted Brembo calipers and a single 267mm rear disc, ensuring reliable and responsive braking power.

The KTM Adventure 1290 Super S 2023 features advanced electronics, including a comprehensive ride-by-wire system, multiple riding modes, and lean-sensitive traction control and ABS. The 7-inch TFT display provides clear and customizable information, while the integrated KTM My Ride system offers smartphone connectivity for navigation and multimedia functions.

Ergonomically, the bike is designed for long-distance comfort with an adjustable seat height ranging from 860mm to 880mm, wide handlebars, and optimized footpeg positioning. The fuel tank capacity is 23 liters, providing a substantial range for extended journeys. Rider and passenger comfort is further enhanced with heated grips and seats.

The 2023 model also emphasizes durability with high-quality components and a robust skid plate to protect the engine during off-road excursions. The KTM Adventure 1290 Super S 2023 represents a blend of cutting-edge technology, superior engineering, and rider-centric features, making it a top choice for adventure motorcycling enthusiasts.

KTM Adventure 1290 Super S 2023 Motorcycle F.A.Q.

How do I set up the electronic suspension on the KTM Adventure 1290 Super S 2023 for off-road use?

To set up the electronic suspension for off-road use, access the bike’s menu via the handlebar controls. Navigate to the 'Suspension' settings and select the 'Off-road' mode. This mode adjusts the suspension for improved traction and comfort on rough terrains.

What should I do if the traction control system is not responding properly?

First, ensure that the traction control system is activated in the settings menu. Check for any error messages on the dashboard. If the issue persists, inspect the wheel sensors for dirt or damage, and consult the dealer if necessary.

How often should the oil be changed on the KTM Adventure 1290 Super S 2023?

The oil should be changed every 9,320 miles (15,000 kilometers) or once a year, whichever comes first. Regular oil checks are recommended to ensure optimal engine performance.

What is the recommended tire pressure for the KTM Adventure 1290 Super S 2023?

The recommended tire pressure is 36 psi (2.5 bar) for the front and 42 psi (2.9 bar) for the rear. Always check the tire pressure when the tires are cold for accurate readings.

How can I troubleshoot a non-starting engine on the KTM Adventure 1290 Super S 2023?

Check the battery connections to ensure they are tight and corrosion-free. Verify that there is fuel in the tank and that the fuel valve is open. If the engine still does not start, inspect the fuses and consult the user manual for further diagnostics.

What maintenance is required for the chain on the KTM Adventure 1290 Super S 2023?

The chain should be cleaned and lubricated every 620 miles (1,000 kilometers). Inspect the chain for proper tension and wear, adjusting as necessary. Replace the chain if there are signs of significant wear or damage.

How do I pair my smartphone with the KTM Adventure 1290 Super S 2023’s display system?

Activate Bluetooth on your smartphone and navigate to the 'Connectivity' menu using the bike’s display. Select 'Pair New Device' and follow the on-screen instructions to complete the pairing process.

What should I check if the ABS warning light stays on while riding?

If the ABS warning light remains on, check the ABS sensors located on the wheel hubs for dirt or damage. Ensure the ABS system is enabled in the settings menu. If the warning persists, have the system checked by a professional.

How do I adjust the riding modes on the KTM Adventure 1290 Super S 2023?

Use the left handlebar switch to navigate through the menu and select 'Riding Modes.' Choose from options such as 'Street,' 'Sport,' 'Rain,' or 'Off-road' to customize the bike's performance to your riding conditions.

What is the procedure for checking the coolant level on the KTM Adventure 1290 Super S 2023?

Ensure the motorcycle is on a level surface and the engine is cool. Locate the coolant reservoir on the right side. The coolant level should be between the 'Min' and 'Max' marks. Top up with the recommended coolant if necessary.