KTM SX 85 2018 Owner's Manual
![KTM SX 85 2018 Motorcycle manual cover](/images/jKKuhwCHEUtcYMEyGRyxviOX/thumbs/thumb175x175.webp)
The recommended oil type for the KTM SX 85 2018 is a high-quality two-stroke engine oil with a 60:1 fuel-to-oil ratio.
The air filter should be cleaned after every ride, especially in dusty conditions, to ensure optimal performance and longevity of the engine.
The recommended tire pressure for the KTM SX 85 2018 is 1.0 bar (14.5 psi) for the front tire and 1.1 bar (16 psi) for the rear tire.
To adjust the suspension, start by setting the sag according to your weight, then adjust the compression and rebound damping settings to achieve the desired ride quality. Refer to the owner's manual for specific settings.
The fuel capacity of the KTM SX 85 2018 is approximately 5.2 liters (1.37 gallons).
The spark plug should be inspected every 10 hours of operation and replaced as needed. It's essential to use the recommended NGK BR10EG spark plug.
Common signs of clutch wear include difficulty in shifting gears, a slipping clutch, and a burning smell. If any of these symptoms occur, inspect and replace the clutch plates as necessary.
To store the KTM SX 85 2018, clean the bike thoroughly, lubricate all moving parts, drain the fuel, and remove the battery. Store it in a dry and cool place, preferably elevated to prevent tire deformation.
The recommended coolant for the KTM SX 85 2018 is a high-quality ethylene glycol-based coolant with anti-corrosive properties, suitable for aluminum engines.
To improve braking performance, regularly check and replace brake pads if worn, ensure the brake fluid is at the correct level, and bleed the brakes to remove any air. Consider upgrading to high-performance brake pads for better stopping power.